Panasonic KX-TG2248S 2.4 Ghz Digital Cdl - Page 53

Troubleshooting Problem You cannot operate the Answering System with the handset. While recording a greeting message, the unit starts to ring and stops recording. During playback, the unit starts to ring and stops playback. Caller ID information is not displayed during message playback (p. 42). Cause & Remedy • Someone is operating the Answering System. • You are too far from the base unit. Walk closer to the base unit. • The unit is recording a message. To answer the call, press [ ] or [ ]. • To answer the call, press [ ] or [ ]. Start again from the beginning after hanging up. • To answer the call, press [ ] or [ ]. To resume playback, press [MESSAGE/SLOW TALK] after hanging up. • Caller ID information will not be displayed - if a message is recorded by using [MEMO/2WAY REC] (p. 44), or - if the Caller List is renewed and the caller ID information is erased (p. 26). General Problem Cause & Remedy The unit does not work. The unit does not announce the displayed caller's name. The unit does not announce the displayed caller's name properly. • Check the settings (p. 8-9). • Check whether the dialing mode setting is correct (p. 13). • Charge the battery fully (p. 8). • Clean the charge contacts and charge again (p. 9). • Install the battery properly (p. 8). • Place the handset on the base unit and unplug the AC adaptor to reset it. Plug in, and try again. • Re-install the battery (p. 8) and charge it fully. • The handset and base unit ringer volumes are OFF (p. 17). • The Talking Caller ID feature is OFF (p. 15). • Name pronunciation may vary. Name pronunciation quality is based on names most commonly used in the United States. • The unit will announce each letter of abbreviations, such as Co., Inc., etc. • Caller ID service supports names of up to 15 letters. If the caller's name has more than 15 letters, the name will not be announced correctly. For assistance, please call: 1-800-211-PANA(7262) 53 Useful Information