Panasonic KX-TG2248S 2.4 Ghz Digital Cdl - Page 8
SETTINGS, Connections, Installing the Battery in the Handset, Battery Charge - replacement handset
UPC - 037988473687
View all Panasonic KX-TG2248S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Settings Connections Fasten the AC adaptor cord. Hook Single-Line Telephone Jack (RJ11C) Telephone Line Cord Power Outlet (AC 120 V, 60 Hz) AC Adaptor • USE ONLY WITH Panasonic AC ADAPTOR PQLV19 (Order No. PQLV19Z). • The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) • If your unit is connected to a PBX which does not support Caller ID, you cannot access Caller ID services. • The unit will not work during a power failure. To connect a standard telephone on the same line, use the Panasonic T-adaptor KX-J66. Installing the Battery in the Handset Insert the battery ( 1 ), and press it down until it snaps into the compartment ( 2 ). Close the cover. 1 2 + + + To replace the battery: Press the notch on the cover firmly and slide it as indicated by the arrow. Replace the old battery with a new one (p. 9). Close the cover and charge the battery for about 6 hours. Battery Charge Place the handset on the base unit and charge OR for about 6 hours before initial use. • The IN USE/CHARGE indicator lights and the unit beeps once. • It is normal for the back on the handset to feel warm during battery charge. IN USE/CHARGE Indicator 8