Panasonic KX-TG2312W KXTG2312 User Guide - Page 34
Initial setting, Voice Mail, VM tone detect, Voice Mail Service, Setting Voice Mail VM Tone Detection
View all Panasonic KX-TG2312W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Voice Mail Service Setting Voice Mail (VM) Tone Detection Handset Your telephone company sends special signals (Voice mail tones) to the unit. Press [C] or [s] to listen to the dial tone. If you hear a series of dial tones followed by a continuous dial tone, this indicates that a new message was recorded. Voice Mail detection is preset at the factory to ON. Minutes after you hang up or after the phone stops ringing, your unit will seize the phone line and check if a message has been recorded. If a new message was recorded at your telephone company, "Voice Mail" will be displayed on the handset. Turn off this programming when: - you do not subscribe to a voice mail service, - your telephone company does not send a series of tones, followed by a continuous tone to indicate you have new voice mail, or - your phone is connected to a business or office telephone system (PBX). See below to turn this setting off. If you are not sure which setting is required, consult your local telephone company or contact the Panasonic Customer Call Center. 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press Select. 3 Press Select at "Voice Mail". 4 Scroll to "VM tone detect" by pressing [d] or [B], then press Select. 5 Select "Off" or "On" by pressing [d] or [B]. 6 Press Save, then press [OFF]. Initial setting KBack dB SelectL Voice Mail KBack dB SelectL VM tone detect KBack dB SelectL VM tone detect :On KBack dB SaveL 34