Panasonic KX-TG2312W KXTG2312 User Guide - Page 36

Special Features Handset Locator Base Unit You can locate the handset or page the handset user with beep tones from the base unit. 1 Press [HANDSET LOCATOR]. • The IN USE indicator flashes rapidly. • The paged handset beeps for 1 minute and displays "Call from Base". 2 To stop paging, Base unit: Press [HANDSET LOCATOR] again. OR Handset: Press [OFF]. • You can also stop paging by pressing any button except [d] or [B]. Temporary Tone Dialing (For Rotary or Pulse Service Users) Handset Press [*] (TONE) before entering access numbers which require tone dialing. • The dialing mode changes to tone. You can enter numbers to access an answering service, electronic banking service, etc. When you hang up, the dialing mode will return to pulse. Muting Your Conversation Handset During a call, you can mute your phone so the other party cannot listen to you. When muting your conversation, you can hear the other party. Press Mute. • "Mute" will flash. • To release the mute, press Mute again. • If you press [C] or [s] to switch between the receiver and speaker, the mute will be released. Talk 00-00-30 K(VE) 0Mute4L Using the PAUSE Key (For PBX Line/Long Distance Calls) Handset We recommend you press Pause or P if a pause is Example 9P15556667777| required for dial with a PBX or to make a long distance call. Ex. Line access number [9] (PBX) KClear PauseL [9] N Pause or P N Phone number • Pressing Pause or P once creates a 3.5 second pause. This prevents misdialing when you dial after confirming OR 9P15551234567| Kf d=Next PL the entered number (p. 18) or dial a stored number (p. 30, 31). • Pressing Pause or P more than once increases the length of the pause between numbers. 36