Panasonic KX TG2344 2.4 Cdl Tot 2 H/s Phone - Page 68
General, Problem, Cause & Remedy - base set problems
UPC - 037988955459
View all Panasonic KX TG2344 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Troubleshooting Problem Cause & Remedy " FULL " flashes and the ANSWER ON indicator flashes rapidly. No new messages are recorded. • Memory is full. Erase unnecessary messages (p. 54). You cannot operate the Answering System from the base unit or the handset. • If another user is in use, you may not be able to operate the Answering System. Try again later. • If another user is listening to messages or the Answering System is handling a call, you cannot operate the Answering System. Try again later. You cannot operate the Answering System from a touch tone phone. • Make sure you entered the correct remote code (p. 56). • The Answering System may not respond if the tones are too short to activate the unit. Press each button firmly. • The Answering System is off. Turn it on (p. 58). You cannot erase messages. • While another user is operating the Answering System or a caller is leaving a message, you cannot erase messages. When you play back messages or turn on the Answering System, the handset and/or base unit announces the wrong day and time. • The date and time may be set incorrectly. Set the date and time again (p. 14). General Problem The handset and/or base unit does not work. Cause & Remedy • Check the settings (p. 9-11). • Check whether the dialing mode setting is correct (p. 15). • Fully charge the battery (p. 10). • Clean the charge contacts and charge again (p. 11). • Check battery installation (p. 10). • Unplug the base unit's AC adaptor to reset it. Plug in, and try again. • Re-install the battery (p. 10) and fully charge it. 68