Panasonic KX-TG9541 Quick Guide - Page 2
Battery installation/Battery charging, Using the unit as a single-line telephone only, Connecting
View all Panasonic KX-TG9541 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
TG954x_(en)_QG.fm Page 2 Thursday, June 27, 2013 4:13 PM Connecting the telephone line cord N To connect to 2 single-line telephone jacks 1 For Line 1: Connect the "Transparent" plug telephone line cord (2-wire cord) (1) to the unit, then to the Line 1 single-line telephone jack (RJ11C) (2) until you hear a click. 2 For Line 2: Connect the "GREEN" plug telephone line cord (4-wire cord) (3) to the unit, then to the Line 2 single-line telephone jack (RJ11C) (4) until you hear a click. 1 2 "Transparent" plug 1 3 2 "GREEN" plug 4 If you subscribe to a DSL/ADSL service, attach a DSL/ADSL filter to the telephone line between the base unit and the telephone line jack. Refer to the operating instructions for connections. Battery installation/Battery charging Charge for about 7 hours. 2 1 Note: L USE ONLY Ni-MH batteries AAA (R03) size (1). L Do NOT use Alkaline/Manganese/Ni-Cd batteries. L Confirm correct polarities (S, T). L Follow the directions on the display to set up the unit. L Confirm "Charging" is displayed (2). Using the unit as a single-line telephone only 1 Connect the "Transparent" plug telephone line cord (2-wire cord) to LINE 1/2. Handset/Base unit: L To use line 1 only: {MENU}(25) s {r}: "Line1" s {SAVE} s {OFF}/{EXIT} L To erase the message "Check tel line2": {MENU}(19) 1 - 2 -