Panasonic KX-TG9541 Quick Guide - Page 4

TG954x_(en)_QG.fm Page 4 Thursday, June 27, 2013 4:13 PM Link to cell You can use the unit to make or answer calls using a cellular line. Your cellular phones must have Bluetooth® wireless technology that is compatible with this product. For more details, please visit our Web site: http://www.panasonic.com/link2cell L Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit. 1 2 1 Cell line 2 Cell phone service providers Pairing a Bluetooth cellular phone (Handset/Base unit) 1 For CELL 1: {MENU}(6241 For CELL 2: {MENU}(6242 For CELL 3: {MENU}(6243 For CELL 4: {MENU}(6244 L After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. 2 Your cellular phone: While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. L Depending on your cellular phone, it may ask you to enter the base unit PIN (default: "0000"). 3 Wait until a long beep sounds. L It may take more than 10 seconds to complete pairing. L When the CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls. 4 Proceed with the operation for your unit. Handset: {OFF} Base unit: {EXIT} Note: L Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phone's operating instructions. Trademarks L The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. All other trademarks identified herein are the property of their respective owners. - 4 -