Panasonic KX-TG9542B KX-TG9541B Owner's Manual (English) - Page 18

Link to Cell Link to cell feature To use this feature, you must first pair and connect your cellular phones to the base unit (page 18). Your cellular phones must have Bluetooth wireless technology that is compatible with this product. This feature allows you to: - make or answer cellular calls using your home phone (handset or base unit) with better reception. - maximize the benefits of cellular services (such as free night and weekend calls, or cellular to cellular call plans) by utilizing unused peak minutes with your home phone. - conserve the battery power of your cellular phone while the unit is on a cellular call. (We recommend charging your cellular phone during the cellular call as your cellular phone battery is being consumed.) Important: R You may pair a maximum of 4 cellular phones and 1 headset. However, the base unit allows only one Bluetooth to be active at a time. R Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit. Pairing a cellular phone Program this setting using either the base unit or one of the handsets. Important: R For more details and the list of compatible cellular phones, please visit our Web site: http://www.panasonic.com/link2cell R Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone. Handset / Base unit 1 For CELL 1: MMENUN#6241 For CELL 2: MMENUN#6242 For CELL 3: MMENUN#6243 For CELL 4: MMENUN#6244 R After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. 2 Your cellular phone: While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. R Depending on your cellular phone, it may ask you to enter the base unit PIN (default: "0000"). 3 Wait until a long beep sounds. R It may take more than 10 seconds to complete pairing. R When the CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls. 4 Proceed with the operation for your unit. Handset: MOFFN Base unit: MEXITN Note: R Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phone's operating instructions. R Make sure you cancel your cellular phone's current pairing if you want to pair it to the other line (page 18). Unpairing a cellular phone You can cancel the pairing of a cellular phone that is stored in the base unit. Program this setting using either the base unit or one of the handsets. Handset / Base unit 1 For CELL 1: MMENUN#6111 For CELL 2: MMENUN#6112 For CELL 3: MMENUN#6113 For CELL 4: MMENUN#6114 2 MbN: "Yes" a MSELECTN R When the cellular phone is unpaired, the CELL indicator is turned off. 3 Proceed with the operation for your unit. Handset: MOFFN Base unit: MEXITN 18 For assistance, please visit http://www.panasonic.com/help TG954x(en)_0628_ver031.pdf 18 2013/06/28 12:35:30