Panasonic KXMB271 Multi Function Printer - Page 14
Approx. 2 kg 4.4 lb., tray, if it is lifted.
UPC - 037988478408
View all Panasonic KXMB271 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
1. Introduction and Installation 3 Load the paper, print-side up (2). Important: L Push and lock the plate (3) in the paper input tray, if it is lifted. 2 5 Insert the paper input tray to the unit, lifting the front part of the tray. Then push it completely into the unit. 3 4 Adjust the recording paper guides. Pinch the front side of the recording paper guide (4), then slide it to match the paper size mark. Pinch the right side of the recording paper guide (5), then slide it to adjust the width to the size of the recording paper. L Make sure that the recording paper is under the paper limit mark (6), and the paper should not be loaded over the snubbers (7). Note: L If the paper is not loaded correctly, re-adjust the paper guides, or the paper may jam. L If the paper input tray does not close, the plate in the paper input tray may be lifted. Push the paper and make sure that the paper is laid flat in the paper input tray. Caution for the paper input tray L Do not drop the paper input tray. 6 7 5 L Hold the paper input tray with both hands when removing or installing. The paper input tray weighs approximately 2 kg (4.4 lb.) when the recording paper is fully installed. 4 Approx. 2 kg (4.4 lb.) 14 For assistance, please visit http://www.panasonic.com/help