Panasonic KXMB271 Multi Function Printer - Page 9
Installation, 1.5 Toner cartridge and drum unit
UPC - 037988478408
View all Panasonic KXMB271 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
1. Introduction and Installation Installation 1.5 Toner cartridge and drum unit The included toner cartridge is a starter toner cartridge. Caution: L Read the following instructions before you begin installation. After you have read them, open the drum unit protection bag. The drum unit contains a photosensitive drum. Exposing it to light may damage the drum. Once you have opened the protection bag: - Do not expose the drum unit to light for more than 5 minutes. - Do not touch or scratch the black drum surface. - Do not place the drum unit near dust or dirt, or in a high humidity area. - Do not expose the drum unit to direct sunlight. L We cannot be responsible for any damage to the unit or degradation of print quality which may occur from the use of a non-Panasonic toner cartridge and drum unit. L Do not leave the toner cartridge out of the protection bag for a long time. It will decrease the toner life. L Do not add toner to the toner cartridge. 1 Before opening the protection bag of the new toner cartridge, shake it vertically more than 5 times. 3 Place the toner cartridge (3) into the drum unit (4) vertically. 3 4 4 Turn the green levers (5) on each side of the toner cartridge while pressing down firmly. 5 5 Make sure that the triangles (6) match, to install the toner cartridge correctly. 6 2 Remove the toner cartridge and drum unit from the protection bags. Peel off the seal (1) from the toner cartridge. L Do not touch or scratch the black drum surface (2). 1 2 For assistance, please visit http://www.panasonic.com/help 9