Panasonic KXTA624 Analog Pbx - Page 105
Waiting from a Central Office or External Feature Access., Call Waiting from a Central Office
View all Panasonic KXTA624 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
3.2 Telephone Features C Conditions • The default setting for Call Waiting is "disabled". • When Call Waiting is enabled, a Call Waiting tone is sent to the user under the following conditions. 1) When an outside call is received, 2) When another extension executes the "Busy Station Signaling (BSS)" feature, or 3) When a doorphone call is received. • Setting "Data Line Security" temporarily cancels this feature. • You can change the desired Call Waiting tone for an incoming outside call and intercom call (Tone 1 or Tone 2). As for a doorphone call, Tone 1 is used as a Call Waiting tone (not changeable). PT • If a Call Waiting tone is heard and the CO or INTERCOM indicator does not flash, this tone indicates Call Waiting from your telephone company. In this case, see "Call Waiting from a Central Office" or "External Feature Access". SLT • If "Hold-2" or "Hold-3" is assigned in System Programming, you must dial "20" after flashing the hookswitch. SLT • You cannot transfer the new call while holding the current call. If you want to do so, first park the original call using the Call Park feature; then hang up; then take the new call. Programming References • Station Programming (Section 2) Call Waiting Tone Type Assignment • System Programming - Installation Manual [104] Hold Mode Selection Feature References Busy Station Signaling (BSS) Call Park Call Waiting from a Central Office Data Line Security External Feature Access Telephone Features 3-45