Panasonic KXTG2314 KXTG2314 User Guide - Page 36

Intercom Intercom calls can be made between two handsets. The handsets have the extension number 1 and 2 which has "[1]" and "[2]" on the display. • If the handset is off the base unit or charger when there are missed calls or new messages in your voice mailbox, the handset's extension number "[1]" or "[2]" is not displayed. To confirm the extension number, either place the handset on the base unit or charger, or view the missed calls (p. 23) and listen to the new messages (p. 41). Paging between Handsets Handset Ex. From the Handset 1 to the Handset 2 1 Handset 1: Press [HOLD/INTERCOM]. • The paged handset will ring for 1 minute and the Ringer/Message Alert indicator flashes rapidly. • To stop paging, press [OFF]. 2 Handset 2: Press [C], [s] or [HOLD/INTERCOM] to answer the page. • Any button except [d], [B] or [OFF] can be pressed to answer the page. 3 Handset 1: When the paged party answers, start talking. Calling HS[2] Call from HS[1] Intercom 00-00-05 MuteL 4 Handset 1 or Handset 2: To disconnect the intercom, press [OFF]. • If the Auto Talk feature is turned on (p. 14), you can also answer a page by simply lifting the handset off the base unit or charger. During an intercom call: • You can switch to the speaker by pressing [s]. To switch back to the receiver, press [C]. • If you have difficulty hearing while using the speakerphone on the handset, decrease the speaker volume by pressing [d]. • If an incoming call is being received, you will hear two tones (incoming call tone, page 44) and the IN USE indicator will flash rapidly on the base unit. To answer the call, press [OFF], then [C] or [s]. • When the ringer volume is turned off (p. 15), the handset will ring at the low level for intercom calls. • You cannot change the ringer tone for intercom calls. 36