Panasonic KXTG2314 KXTG2314 User Guide - Page 44

Special Features FLASH Button Handset Pressing [FLASH/CALL WAIT] allows you to use special features of your host PBX such as transferring an extension call, or accessing optional telephone services such as call waiting. • Pressing [FLASH/CALL WAIT] cancels Temporary Tone Dialing mode or the mute (p. 42). Selecting the flash time The flash time required depends on your telephone exchange or host PBX. You can select the following flash times: "700, 600, 400, 300, 250, 110, 100 or 90 ms (milliseconds)". The factory preset is "700 ms". • If PBX functions do not work correctly, consult your PBX supplier for the correct settings. 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press Select. 3 Scroll to "Set tel line" by pressing [d] or [B], then press Select. Set tel line KBack dB SelectL 4 Scroll to "Set flash time" by pressing [d] or [B], then press Select. Set flash time KBack dB SelectL 5 Select the desired time by pressing [d] or [B]. Set flash time :700ms KBack dB SaveL 6 Press Save, then press [OFF]. Incoming Call Tone Handset During an intercom call (p. 36), you can be informed of incoming calls by two tones. If this feature is turned on, incoming call tones will be heard for as long as the line is ringing. If this feature is set to "2", incoming call tones will be heard only 2 times. If this feature is turned off, no tones will be heard. The factory preset is "2". 1 Press [MENU]. 2 Scroll to "Ringer setting" by pressing [d] or [B], then press Select. 3 Scroll to "Incoming call." by pressing [d] or [B], then press Select. Incoming call. KBack dB SelectL 4 Select "On", "Off" or "2" by pressing [d] or [B]. Incoming call tone :2 KBack dB SaveL 5 Press Save, then press [OFF]. 44