Panasonic KXTS620 One Line Phn W/tam-l - Page 13

Settings After recover from power failure, " " will flash. Readjust the time and date. For Caller ID service users (p. 24) If a time display service is available with the Caller ID service: • The Caller ID information will re-set the clock after the ring if the adjusted time and/or date is incorrect and the Time Adjustment set to ON (p. 15). If the time/ date has not previously been set, the Caller ID information will not adjust the clock. Display Language You can select "English" or "Español" as the display language. Your phone comes from the factory set to "English". Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off. 1 Press {FUNCTION/EDIT}. 2 Scroll to "Change language?" by pressing {4} or {3}. 3 Press {OK} (Yes key). Language :English  [OK]=Save 4 Select "English" or "Español" by pressing {4} or {3}. 5 Press {OK} (Save key). • A long beep sounds. • The display will return to step 2. To exit the programming mode, press {EXIT} or wait for 60 seconds. • You can exit the programming mode any time by pressing {EXIT}. Dialing Mode If you have touch tone service, set to Tone. If rotary or pulse service is used, set to Pulse. Your phone default setting is Tone. Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off. 1 Press {FUNCTION/EDIT}. 2 Scroll to "Program ?" by pressing {4} or {3} and press {OK} (Yes key). 3 Scroll to "Set dial mode ?" by pressing {4} or {3} and press {OK} (Yes key). 4 Select "Pulse" or "Tone" by pressing {4} or {3}. (Example: "Tone" is selected.) Dial mode :Tone  [OK]=Save 5 Press {OK} (Save key). • A long beep sounds. • The display will return to step 3. To exit the programming mode, press {EXIT} or wait for 60 seconds. • You can exit the programming mode any time by pressing {EXIT}. For assistance, please visit http://www.panasonic.com/phonehelp 13