Panasonic KXTS620 One Line Phn W/tam-l - Page 54

Useful Information Troubleshooting Problem The unit does not work. The unit does not ring. You cannot dial. The other party suddenly cannot hear your voice during a conversation. You cannot program items such as the dialing mode. You cannot store a name and phone number in memory. While programming or searching, the unit starts to ring and stops the program/search. Cause and Remedy • Check the settings (p. 9-15). • Unplug the AC adaptor to reset. Plug in, and try again. • The ringer volume is set to OFF and "~" is displayed. Select the ringer volume to HIGH, MID or LOW by pressing {HOLD/RINGER} (p. 14). • Check that the dialing mode selection is correct (p. 13). • The dialed number is restricted. To cancel, see page 42. • {MUTE} may have been pressed during the conversation. If " " is displayed, press {MUTE}. • Programming is not possible when the handset is off the cradle, the SP-PHONE/HEADSET indicator lights, or when viewing caller information. • Do not pause for over 60 seconds while programming. • Programming is not possible when the handset is off the cradle or the SP-PHONE/HEADSET indicator lights. • Check the AC adaptor is connected to the unit. • Do not pause for over 60 seconds while storing. • Do not enter a phone number more than 32 digits long. • When using the Call Restriction feature (p. 42), you cannot store a phone number in the Direct Dial memory ({M1}, {M2} or {M3}) and emergency numbers (#). • If "Phonebook full" is displayed, erase other stored items from the Phonebook memory (p. 35). • To answer the call, lift the handset or press {SP-PHONE/HEADSET}. Start again from the beginning after hanging up. 54 For assistance, please visit http://www.panasonic.com/phonehelp