Panasonic LB60U Operating Instructions

Panasonic LB60U - XGA LCD Projector Manual

Get Panasonic LB60U - XGA LCD Projector PDF manuals and user guides
UPC - 791871111284
View all Panasonic LB60U manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic LB60U manual content summary:

  • Panasonic LB60U | Operating Instructions - Page 1
    ENGLISH R LCD Projector Commercial Use Operating Instructions Model No. PT-LB60NTU PT-LB60U Before operating this product, please read the instructions carefully and save this manual for future use. TQBJ 0193
  • Panasonic LB60U | Operating Instructions - Page 2
    you will be pleased with your Panasonic LCD projector. The serial number of your product may be found on its bottom. You should note it in the space provided below and retain this booklet in case service is required. Model number: PT-LB60NTU / PT-LB60U Serial number: IMPORTANT SAFETY NOTICE WARNING
  • Panasonic LB60U | Operating Instructions - Page 3
    instructions the user PT-LB60NTU / PT-LB60U Trade Name: Panasonic Responsible party: Panasonic Corporation of North America Address: One Panasonic Way Secaucus New Jersey 07094 Telephone number: 1-800-528-8601 or 1-800-222-0741 Email: [email protected] This device complies with Part
  • Panasonic LB60U | Operating Instructions - Page 4
    ..57 Cleaning and replacing the air filter ..59 Replacing the lamp unit 60 Before calling for service..........63 Cleaning and maintenance .......64 Others Specifications 65 Appendix 67 Projection dimensions calculation methods, List of compatible signals, Guide screen for computer connection
  • Panasonic LB60U | Operating Instructions - Page 5
    the cabinet is broken, disconnect the power cord plug from the wall outlet. B Continued use of the projector in this condition may result in fire or electric shocks. B Contact an Authorized Service Center for repairs. Do not overload the wall outlet. B If the power supply is overloaded (for example
  • Panasonic LB60U | Operating Instructions - Page 6
    could result. B If any water gets inside the projector, contact an Authorized Service Center. Do not insert any foreign objects into the projector. B Do not insert any metal objects or flammable objects into the projector or drop them onto the projector, as doing so can result in fire or electric
  • Panasonic LB60U | Operating Instructions - Page 7
    can cause burns. Before replacing the lamp, be sure to disconnect the power cord plug from the wall outlet. B Electric shocks or explosions can result if this is not done. Caution Do not cover the air inlet port or the air outlet port. B Doing so may cause the projector to overheat, which can
  • Panasonic LB60U | Operating Instructions - Page 8
    of mercury as fluorescent lamps, and the broken pieces may cause injury. B If you believe that you have absorbed the gas or that the gas has got into your eyes or mouth, seek medical advice immediately. B Ask your dealer to replace the lamp unit and check the inside of the projector. 8-ENGLISH
  • Panasonic LB60U | Operating Instructions - Page 9
    Check that all of the accessories shown below have been included with your projector. Card remote control unit* (PT-LB60NTU: N2QAYA000001 x1 PT-LB60U: N2QAYA000002 x1) AAA batteries for remote control unit (x2) RGB signal cable [1.8 m (5´10˝), K1HA15DA0002 x1] *The illustration above is the
  • Panasonic LB60U | Operating Instructions - Page 10
    extended and do not put anything else in the bag other than the projector, cables and the remote control unit. Cautions regarding setup Avoid setting up in places which are subject to vibration or shocks. The internal parts can be damaged, which may cause malfunctions or accidents. Avoid setting up
  • Panasonic LB60U | Operating Instructions - Page 11
    the screen, and do not let it become dirty or damaged. Lamp The lamp may need to be replaced earlier due to variables such as individual lamp characteristics, usage conditions and the installation environment, especially when the projector is subjected to continuous use for more than 10 hours or the
  • Panasonic LB60U | Operating Instructions - Page 12
    Location and function of each part Projector # $% ' & * ) ' ( # Projector control panel (page 14) $ Zoom ring (page 27) % Focus ring Press to adjust the angle of tilt of the projector. ( Lens cover ) Projection lens * Remote control signal receptor (page 24) 12-ENGLISH
  • Panasonic LB60U | Operating Instructions - Page 13
    Preparation Projector # $% ( ' & # Connector panel (page 16) $ Air outlet port Do not cover this port. % Speaker & Front adjustable legs (L/R) (page 27) ' Air inlet port, Air filter (page 59) Do not cover this port. ( Lamp unit cover (page 60) NOTE: B During projection of an
  • Panasonic LB60U | Operating Instructions - Page 14
    Projector control panel # $ % &' ( Menu operation ) * Remote control unit ' - . / 0 1 +, ) ( +ɾ, 2 * 3 4 5 *The illustration above is the remote control unit for the PT-LB60NTU. *The remote control unit for the PT-LB60U is not equipped with PAGE buttons, a MULTI-LIVE
  • Panasonic LB60U | Operating Instructions - Page 15
    replace the lamp unit. It flashes if a circuit abnormality is detected. % TEMP indicator (page 57) This indicator illuminates if an abnormally high temperature is detected inside the projector -LIVE SELECT button (PT-LB60NTU only) This button is used when the projector is controlled by means of a
  • Panasonic LB60U | Operating Instructions - Page 16
    the WIRELESS button is for the PT-LB60NTU only). 2 SHUTTER button ( This button is used to reset the projector adjustment values to the factory projector's built-in speaker and VARIABLE AUDIO OUT connector. Refer to page 52 for details on how to adjust the volume without using the remote control
  • Panasonic LB60U | Operating Instructions - Page 17
    a video deck. * VARIABLE AUDIO OUT connector (pages 21, 22, and 23) This connector is used to output the audio signals which are input to the projector. If audio equipment is connected to this connector, no sound will be output from the built-in speakers. + PC 1/2 AUDIO IN connectors (pages 21 and
  • Panasonic LB60U | Operating Instructions - Page 18
    the separate ceiling bracket (ET-PKB30) when using the ceiling installation method. B Do not set up the projector vertically or tilted horizontally, otherwise it may cause damage to the projector. B Do not set up the projector in a place that is tilted at more than ±30° vertically. Setting up the
  • Panasonic LB60U | Operating Instructions - Page 19
    Getting started SW SH H1 Projector position Top edge of screen Screen L Bottom edge of screen L Screen 96.2 mm (3-25/32˝) L: Projection distance SH: Image height SW:Image width H1: Distance from center of lens to bottom edge of projected image ENGLISH-19
  • Panasonic LB60U | Operating Instructions - Page 20
    Projection distances 4:3 Screen size (diagonal) 0.84 m(33˝) 1.02 m(40˝) 1.27 m(50˝) 1.52 m(60˝) 1.78 m(70˝) 2.03 m(80˝) 2.29 m(90˝) 2.54 m(100˝) 3.05 m(120˝) 3.81 m(150˝) 5.08 m(200˝) 6.35 m(250˝) 7.62 m(300˝) Projection distance (L) Wide (LW) Telephoto (LT) - 1.2 m(3´11˝) 1.1 m(3´7˝) 1.4
  • Panasonic LB60U | Operating Instructions - Page 21
    Getting started Connections Notes on connections B Read the instruction manual for each peripheral device carefully before connecting it. B Turn off the -ROM for details on the wireless network that can be used for controlling the projector with a personal computer. (PT-LB60NTU only) ENGLISH-21
  • Panasonic LB60U | Operating Instructions - Page 22
    (male) adapter cable Red (connect to PR signal connector) Blue (connect to PB signal connector) Green (connect to Y signal connector) Computer for control use DVD player (with component video connectors) DIN 8-pin (male) BNC/RCA adapter Serial adapter (ET-ADSER : sold separately) Audio system
  • Panasonic LB60U | Operating Instructions - Page 23
    Getting started Connecting to video equipment (2) Computer for control use DVD player Serial adapter (ET-ADSER : sold separately) DIN 8-pin (male) Audio system Video deck ENGLISH-23
  • Panasonic LB60U | Operating Instructions - Page 24
    it. $ Insert the batteries into the battery holder so that the polarities are correct. % Replace the battery cover (a click will be heard). AAA batteries (two) NOTE: B Do not drop the remote control unit. B Keep the remote control unit away from liquids. B Remove the batteries if not using the
  • Panasonic LB60U | Operating Instructions - Page 25
    ENGLISH-25 Getting started
  • Panasonic LB60U | Operating Instructions - Page 26
    into the wall outlet. BThe POWER button on the projector will illuminate red. $Press the POWER button. BThe POWER button on the projector will flash green. After a short period, it will A tinkling sound may be heard when the lamp unit is turned on, but this is not a sign of a malfunction. 26-ENGLISH
  • Panasonic LB60U | Operating Instructions - Page 27
    . (page 30) BWhen "SIGNAL SEARCH" is set to "ON", the projector detects which signals are being input, and uses these signals for projection. BIf no signal is detected, the guide screen for computer connection will be displayed (when "INPUT GUIDE" in the "OPTION" menu is set to "DETAILED". Refer to
  • Panasonic LB60U | Operating Instructions - Page 28
    button. BThe "POWER OFF" confirmation screen will be displayed. $Press the POWER button again. BThe lamp unit will switch off and the picture will stop being projected. (The POWER button on the projector will illuminate orange while the cooling fan is still operating.) NOTE: BPress any button other
  • Panasonic LB60U | Operating Instructions - Page 29
    after the Green Flashing power has been turned on while the POWER button on the projector is illuminated red. (After a short period, a picture will be projected.) Illuminated A picture is being projected. The lamp is cooling down after the power has been Illuminated turned off or while direct
  • Panasonic LB60U | Operating Instructions - Page 30
    INPUT SELECT button. BThe input signal selected will change as shown below each time the INPUT SELECT button is pressed. INPUT SELECT button Changing signals Projector control panel Control panel Remote control unit 1$
  • Panasonic LB60U | Operating Instructions - Page 31
    CLOCK" and "CLOCK PHASE" when RGB signals are being input. Press the AUTO SETUP button while RGB signals are being projected. Projector control panel Screen Projected image B Automatic positioning will be carried out. [ Useful functions NOTE: B"SIGNAL SEARCH" will also be carried out. (When
  • Panasonic LB60U | Operating Instructions - Page 32
    it does in normal projection mode. Press the SHUTTER button. B The picture and sound will be turned off. B Press any button on either the projector or remote control unit to return to normal operating mode. NOTE: B You can also select "SHUTTER" from the on- screen menu (refer to page 53). Adjusting
  • Panasonic LB60U | Operating Instructions - Page 33
    Enlarging the picture (DIGITAL ZOOM) You can enlarge the projected image and move the enlarged area. Press the DIGITAL ZOOM +/- button. B The picture will then be enlarged to 1.5 times the normal size. BPress the MENU button to return to the normal screen. Menu operation (on connector panel)
  • Panasonic LB60U | Operating Instructions - Page 34
    Displaying two screens (INDEX WINDOW) This function lets you store a picture which is being projected into memory, so that you can display a still picture and a moving picture on the screen. Press the INDEX WINDOW button. B The current moving picture will be captured in a still window. B Press the
  • Panasonic LB60U | Operating Instructions - Page 35
    . Menu operation (on connector panel) Moving the pointer Press the FGIH buttons to move the pointer. The pointer will move in 8 directions as shown below. The pointer will move in 4 directions as shown below. You can select the pointer in "POINTER
  • Panasonic LB60U | Operating Instructions - Page 36
    screen menus Menu screens The various settings and adjustments for this projector can be carried out by selecting the operations from on-screen The illustrations of the on-screen menus in this operating instructions are for the PT-LB60NTU. PICTURE menu (page 40) POSITION menu (page 44) 36-ENGLISH
  • Panasonic LB60U | Operating Instructions - Page 37
    LANGUAGE menu (page 48) SECURITY menu (page 54) G F 2/2 WIRELESS menu (page 56) (PT-LB60NTU only) OPTION menu (page 49) G F Adjustments and settings ENGLISH-37
  • Panasonic LB60U | Operating Instructions - Page 38
    Menu operation guide # Press the MENU button. The menu screen will be displayed. Menu operation (on connector panel) $ Press the F or G button to select an item from the
  • Panasonic LB60U | Operating Instructions - Page 39
    for the item will then be displayed. Unavailable onscreen menu items This projector has unadjustable items and unusable functions depending on the signal being input factory default If you press the DEFAULT button on the remote control unit, you can return settings to the factory default settings
  • Panasonic LB60U | Operating Instructions - Page 40
    Adjusting the picture # Press the MENU button to display the menu screen. $ Select the "PICTURE" menu from the main menu, and then press the ENTER button. % Press the F or G button to select an item. & Press the I or H button to adjust the value or change the setting. For items with selective
  • Panasonic LB60U | Operating Instructions - Page 41
    # Press the F or G button to select "PICTURE MODE", and then press the I or H button to select "NATURAL". $ Press the DEFAULT button on the remote control unit. % Press the F or G button to select "COLOR TEMPERATURE", and then press the I or H button to select "STANDARD". ENGLISH-41 Adjustments and
  • Panasonic LB60U | Operating Instructions - Page 42
    NOTE: B "AUTO" may not function correctly if any objects are placed on the projector. B "AUTO" will be disabled when "INSTALLATION" in the "OPTION" menu is set to "REAR/DESK" or "REAR/CEILING". AI ON The lamp is controlled according to the input signals to project images with the best quality. OFF
  • Panasonic LB60U | Operating Instructions - Page 43
    is of such poor quality that the correct format cannot be automatically distinguished, change the setting manually to the required TV system. NOTE: B When set to "AUTO", the projector automatically distinguishes between NTSC/NTSC 4.43/PAL/PAL60/ PAL-M/PAL-N/SECAM signals. STILL MODE (S-VIDEO/VIDEO
  • Panasonic LB60U | Operating Instructions - Page 44
    is not obtained when "AUTO SETUP" is carried out, adjust the items manually.) & Press the I or H button to adjust the value or change the KEYSTONE being input When an RGB/YPBPR signal is being input This projector detects its own degree of tilt and corrects the keystone distortion automatically
  • Panasonic LB60U | Operating Instructions - Page 45
    when you turn on the power, the amount of correction will be reset and "REALTIME KEYSTONE" will function again if the tilt is different from the last time you used the projector. If you correct the keystone distortion manually when "REALTIME KEYSTONE" is set to "OFF", the amount of correction will
  • Panasonic LB60U | Operating Instructions - Page 46
    :9 which include a detector signal. This detector signal is output by some sources such as wide-vision video decks. B When "ASPECT" is set to "AUTO", the projector recognizes the detector signal and automatically switches the aspect ratio to 16:9. 46-ENGLISH
  • Panasonic LB60U | Operating Instructions - Page 47
    :9 screen, distortion may occur around the edges of the picture so that part of the picture is no longer visible. Programes which have 4:3 aspect ratios is converted to the same resolution as the LCD panels before being projected. This may sometimes cause problems with the quality of the picture. OFF
  • Panasonic LB60U | Operating Instructions - Page 48
    Changing the display language # Press the MENU button to display the menu screen. $ Select the "LANGUAGE" menu from the main menu, and then press the ENTER button. % Press the F or G button to select a language, and then press the ENTER button. 1/2 G F G F 2/2 Indicates the language which is
  • Panasonic LB60U | Operating Instructions - Page 49
    set "INPUT GUIDE" to "SIMPLE" or "OFF". STARTUP LOGO Adjustments and settings When the input signal is changed, the input signal information will be displayed in the upper right corner of the projected images. You can select the level of the input signal information. ON The "Panasonic" logo will
  • Panasonic LB60U | Operating Instructions - Page 50
    SELECT LAMP POWER If you press the POINTER button on the remote control unit, LAMP RUNTIME This setting displays the usage time for the lamp unit which is currently being used. When replacing the lamp unit, follow the instructions on page 61, and reset "LAMP RUNTIME" to "0". NOTE: B The lamp
  • Panasonic LB60U | Operating Instructions - Page 51
    PANEL" to "INVALID". A confirmation screen will then be displayed. Select "OK" by using I or H button. To use the buttons on the projector, set to "VALID" by using the remote control unit. AUTO SETUP This should normally be set to "AUTO". AUTO "AUTO SETUP" will be carried out when the input signal
  • Panasonic LB60U | Operating Instructions - Page 52
    RGB/YPBPR (480i, 576i, 480p, 576p, 1 080/60i, 1 080/50i, 720/60p and VGA480 signals only) This setting should be changed in accordance with the projector setting-up method. (Refer to page 18.) FRONT/DESK When the projector is placed on a desk or similar in front of a screen. FRONT/CEILING When the
  • Panasonic LB60U | Operating Instructions - Page 53
    in the same way as the "SHUTTER" button on the remote control unit. Refer to page 32 for details. OSD DESIGN item. XGA MODE [RGB(XGA) only] Adjust this item if the projected image overflows from the screen when an XGA signal is being input. XGA Select projector. ENGLISH-53 Adjustments and settings
  • Panasonic LB60U | Operating Instructions - Page 54
    Setting up the security function This projector is equipped with a security function. A password input The password input screen can be displayed when the power is turned on. All of the controls other than the POWER button are disabled unless the password is entered correctly. OFF "INPUT PASSWORD"
  • Panasonic LB60U | Operating Instructions - Page 55
    NOTE: B The entered password will appear as . It will not be displayed on the screen. B If you enter the wrong password, an error message will be displayed. Enter the correct password again. TEXT DISPLAY You can set text to be displayed at the bottom of the projected image at all times. OFF "TEXT
  • Panasonic LB60U | Operating Instructions - Page 56
    setup (PT-LB60NTU only) You need to make adjustments on some items when controlling the projector with a personal computer by means of the wireless network. Refer to the accessory CD-ROM for details. NETWORK Select the network setting you want to use. NAME CHANGE The name for this projector can be
  • Panasonic LB60U | Operating Instructions - Page 57
    indicator and the LAMP indicator are illuminated There are two indicators on the control panel of the projector which give information about the operating condition of the projector. These indicators illuminate or flash to warn you about problems that have occurred inside the projector, so if you
  • Panasonic LB60U | Operating Instructions - Page 58
    Problem replace the lamp unit. Flashing (red) An abnormality has been detected in the lamp circuit. B Does "REPLACE Possible cause LAMP" appear on the screen after the projector Service Center to dealer or an replace the lamp Authorized unit. (page 60) Service Center to replace the lamp
  • Panasonic LB60U | Operating Instructions - Page 59
    dealer. Furthermore, if the lamp unit is being replaced, replace the air filter at this time also. Air filter cover % Replace the air filter, and then install the air filter cover. Air filter NOTE: B Be sure to install the air filter before using the projector. If the projector is used without the
  • Panasonic LB60U | Operating Instructions - Page 60
    fluorescent light. B A Phillips screwdriver is necessary for removing the lamp unit. NOTE: B The projector is not supplied with a replacement lamp unit. Please ask your dealer for details. Lamp unit product no.: ET-LAB30 CAUTION: B Do not use any lamp unit other than the one with the product number
  • Panasonic LB60U | Operating Instructions - Page 61
    mode. Remains displayed until any button is pressed. Lamp unit replacement procedure NOTE: B If the lamp usage time has passed 2 000 hours (when "LAMP POWER" has been set to "STANDARD" and when "AI" has been set to "OFF"), the projector will switch to standby mode after approximately 10 minutes
  • Panasonic LB60U | Operating Instructions - Page 62
    : B Press any button other than the POWER button to cancel the "LAMP RUNTIME" screen. - Press the POWER button to turn off the power. . Disconnect the power cord after the POWER button on the projector illuminates red. This will reset the cumulative usage time for the lamp unit to "0". 62-ENGLISH
  • Panasonic LB60U | Operating Instructions - Page 63
    B The battery may not be inserted correctly. 24 B The remote control signal receptor on the projector 24 may be obstructed. B The remote control unit may be out of the 24 operation range. The buttons on the projector do not function. B The "CONTROL PANEL" may be set to "INVALID". 51 In order
  • Panasonic LB60U | Operating Instructions - Page 64
    B There may be a problem with the video tape or - other signal source. B A signal which is not compatible with the projector 68 may be being input. dry with a dry cloth. If using a chemically-treated cloth, read the instructions supplied with the cloth before use. Do not wipe the lens with a
  • Panasonic LB60U | Operating Instructions - Page 65
    transparent LCD panels (RGB) Active matrix method 786 432 (1 024 x 768) x 3 panels Manual zoom (1.2x) / Manual focus F 1.7 - 1.8 f 24.0 mm - 28.8 mm UHM lamp (220 4 cm x 3 cm oval x 1 1 W (mono) Wireless LAN (PT-LB60NTU only): IEEE802.11 b/g Connectors PC IN/OUT: During RGB input/output: R.G.B.:
  • Panasonic LB60U | Operating Instructions - Page 66
    : PT-LB60NTU: PT-LB60U: Operating environment: Temperature: Humidity: Certifications: 2.6 kg (5.7 lbs.) 2.5 kg (5.5 lbs.) 0 °C - 40 °C (32 °F - 104 °F) [When the "HIGHLAND" is set to "ON" (page 52): 0 °C - 35 °C (32 °F - 95 °F)] 20% - 80% (no condensation) UL60950, C-UL FCC Class B
  • Panasonic LB60U | Operating Instructions - Page 67
    Appendix Projection dimensions calculation methods If the screen size (diagonal) is SD (m), then the following formula is used to calculate the projection distance for the wide lens position (LW) and the projection distance for the telephoto lens position (LT). 4:3 SD LW/LT Minimum Projection
  • Panasonic LB60U | Operating Instructions - Page 68
    x 600 46.9 75.0 49.5 A OK RGB A OK RGB A OK RGB 800 x 600 53.7 85.1 56.3 A OK RGB MAC16 832 x 624 49.7 74.6 57.3 A OK RGB XGA * 1 024 x 768 1 024 x 768 48.4 60.0 56.5 70.1 65.0 75.0 AA AA RGB RGB 1 024 x 768 60.0 75.0 78.8 AA RGB 1 024 x 768 68.7 85
  • Panasonic LB60U | Operating Instructions - Page 69
    Guide screen for computer connection Refer to the list below for details on the keyboard commands to change the output setting. Manufacturer Panasonic NEC TOSHIBA SHARP HP FUJITSU Keyboard command Fn + F3 Fn + F5 Fn + F10 Manufacturer EPSON DELL IBM SONY Apple Other Keyboard command Fn + F8 Fn +
  • Panasonic LB60U | Operating Instructions - Page 70
    panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal bytes 1 byte-5 bytes (03h) NOTE: B The projector can not receive the command for 10 seconds after the lamp is switched on. Wait 10 seconds before sending the command
  • Panasonic LB60U | Operating Instructions - Page 71
    WIRELESS (PT-LB60NTU only) Callback 0 = Standby 1 = Lamp ON control active 2 = Lamp ON 3 = Lamp OFF control active projector when the shutter function is used, the "ER401" command will be sent from the projector to the computer and the shutter function will be turned off. Cable specifications
  • Panasonic LB60U | Operating Instructions - Page 72
    7(-1/4) 96.2(3-25/32) 327(12-27/32) 211.4(8-5/16) Trademark acknowledgements B VGA and XGA are trademarks of International Business Machines Corporation. B Macintosh is a registered trademark of Apple Computer of disposal. 72-ENGLISH These Operating Instructions are printed on recycled paper.
  • Panasonic LB60U | Operating Instructions - Page 73
    NE PAS EXPOSER CE PRODUIT À L'EAU OU À L'HUMIDITÉ Alimentation: Ce projecteur LCD est conçu pour fonctionner sur secteur de 100 V - 240 V, 50 Hz/60 exclamation dans un triangle avertit l'usager de la présence d'instructions importantes concernant l'utilisation et l'entretien (réparation) dans la litt
  • Panasonic LB60U | Operating Instructions - Page 74
    -même est très dangereux, et ne doit jamais être fait. Ne pas installer ce projecteur dans un endroit qui n'est pas assez résistant pour supporter le poids du projecteur. B Si l'emplacement d'installation n'est pas assez résistant, le projecteur risque de tomber et causer de graves blessures et (ou
  • Panasonic LB60U | Operating Instructions - Page 75
    Préparatifs B Pour toute inspection, réglage ou réparation, s'adresser à un centre technique agréé. Nettoyer la fiche du cordon d'alimentation régulièrement afin d'éviter toute accumulation de poussière. B Si de la poussière s'accumule sur la fiche du cordon d'alimentation, l'humidité peut
  • Panasonic LB60U | Operating Instructions - Page 76
    le laisse tomber et des blessures et des mauvais fonctionnements peuvent s'ensuivre. Lors du remplacement de la lampe, la laisser refroidir pendant au moins une heure avant de la manipuler. B Le couvercle de la lampe devient très chaud, et on risque de se brûler si on le touche. Avant de remplacer
  • Panasonic LB60U | Operating Instructions - Page 77
    Préparatifs B Ne pas installer le projecteur dans des endroits étroits, mal ventilés tels que des placards ou des étagères. B Ne pas placer le projecteur sur des tissus ou du papier, ces matériaux peuvent être aspirés dans l'orifice d'entrée d'air. Ne pas installer le projecteur dans des endroits
  • Panasonic LB60U | Operating Instructions - Page 78
    gaz, ou que le gaz a pénétré dans les yeux ou la bouche, consulter immédiatement un médecin. B Demander à son revendeur de remplacer l'unité de lampe et de vérifier l'intérieur du projecteur. Demander à un centre technique agréé de nettoyer l'intérieur du projecteur au moins une fois par an. B S'il
  • Panasonic LB60U | Operating Instructions - Page 79
    de température brusques, à proximité d'un climatiseur par exemple. La durée de vie de la lampe risquerait d'être réduite. Ne pas installer le projecteur près de lignes d'alimentation électrique à haute tension Bien noter que ceci n'affecte pas le bon fonctionnement de votre LCD. FRANÇAIS-79
  • Panasonic LB60U | Operating Instructions - Page 80
    si on le touche. Notes sur le remplacement du bloc de lampe B La lampe produisant la lumière est en verre; il ne faut donc : B Les heures d'utilisation expliquées ci-dessus concernent l'utilisation lorsque "PUISSANCE DE LA LAMPE" dans le menu "OPTION" a été réglée sur "MODE STANDARD" et lorsque "
  • Panasonic LB60U | Operating Instructions - Page 81
    'à ce d'attente. qu'une touche quelconque soit pressée. Méthode de remplacement du bloc de lampe REMARQUE: B Si la durée d'utilisation de la lampe a dépassée 2 000 heures (lorsque "PUISSANCE DE LA LAMPE" a été réglé sur "MODE STANDARD" et lorsque "AI" a été réglé sur "NON"), le projecteur passe en
  • Panasonic LB60U | Operating Instructions - Page 82
    puis utiliser un tournevis Phillips pour resserrer fermement les vis de fixation du couvercle du bloc de lampe. REMARQUE: B S'assurer de bien installer le bloc de lampe et le couvercle du bloc de lampe. S'ils ne sont pas bien installés, cela peut déclencher le circuit de protection et le projecteur
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
ENGLISH
R
Before operating this product, please read the instructions carefully and save this
manual for future use.
LCD Projector
Operating Instructions
Model No.
PT-LB60NTU
PT-LB60U
TQBJ 0193
Commercial Use