Panasonic MC-UG729 MC-UG729 Owner's Manual (Multi Language) - Page 46
Replacing Belt
View all Panasonic MC-UG729 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Replacing Belt Belt Courroie Correa Motor Shaft Arbre du moteur Eje del motor Agitator Agitateur Agitador Motor Shaft Arbre du moteur Eje del motor Belt Groove Rainure de la courroie Polea para correa ➢ Replace belt whenever a burning rubber smell caused by excessive slippage occurs. ➢ Remove lower plate. See "Removing and Installing Lower Plate" ➢ Remove agitator by carefully lifting out. ➢ Remove worn or broken belt. ➢ Clean agitator and the end caps (page 48). End Cap Bouchon Tapa del extremo Slot Fente Ranura Agitator Agitateur Agitador Nozzle Tête d'aspiration Boquilla ➢ Loop new belt around motor shaft and agitator belt groove; see illustration for correct belt routing. ➢ Reinstall agitator back into nozzle housing grooves. ➢ After reinstalling the agitator, turn it by hand to make sure that belt is not twisted or pinched and that all rotating parts turn freely. ➢ Reinstall lower plate. Ensure tabs are locked into slots. - 46 -