Panasonic NE1757R NE1257R User Guide - Page 11

How to Operate D. PROGRAMMING DOUBLE OR TRIPLE QUANTITY PAD The oven can not be programmed when Program Lock is activated! (see page 11-12) DO NOT OPEN THE DOOR WHILE PROGRAMMING! Example: To program 1.5 times of heating time for double quantity into Number/Memory pad "5" PAD INSTRUCTION 1 Keep the door closed. Digital Display Window must be blank. DIGITAL DISPLAY WINDOW 2 PROG Press Prog pad. PROG "PROG" will start to blink. 3 Press Number/Memory pad "5". 5 The selected pad number will appear and currently programmed information will be indicated. PROG 1 HI 4 x 2 Press Double Quantity pad. PROG The currently programmed magnification number will appear. Note: 1.6 times is preset at factory. 5 Press Number/Memory pads "1" and "5" for 1.5 times. 1 5 The programmed magnification number will appear. PROG If pad 5 is programmed for 3 minutes, the time for the double quantity will be 4 minutes and 30 seconds. Available range is 0.1-5.0 times. 6 PROG Press Prog pad. PROG "PROG" will stop blinking. This means that you have completed programming. • Three seconds later, Digital Display Window will go blank. Note: • If you want to program your desired magnification number for triple quantity, repeat as above, using Triple Quantity pad instead of Double Quantity pad. E. PROGRAM LOCK XXTo Activate Program Lock: Example: To program cooking at DEFROST power for 1 minute into Number/Memory pad "5" PAD INSTRUCTION 1 Keep the door closed. Digital Display Window must be blank. DIGITAL DISPLAY WINDOW 2 PROG Press Prog pad until "PROG", "P" and "L" appear. (more than five PROG seconds) "PROG", "P" and "L" will appear. In Program Lock mode: • The oven is started by pressing the desired Number/Memory pad. There is no need to press Start pad. • Opening the door cancels the remaining time on the program. • The oven can not be programmed or run manually until the program lock is released. - 11 -