Panasonic NE1757R NE1257R User Guide - Page 13

How to Operate For selecting length of tone "short beeps for 60 seconds": Example: To select short beeps for 60 seconds PAD INSTRUCTION Follow step 1-4 on page 12. DO NOT CLOSE THE DOOR! 5 Within three seconds after pressing Prog pad at step 4, press 0 Number/Memory pad "0" once. "PROG" will start to blink and 2nd Stage Heating Indicator "2" (the length of beep tone "short beeps for 60 seconds") will be indicated. 6 PROG Press Prog pad. "PROG" will stop blinking. This means that you have completed programming. Three seconds later, "0" will appear. • Close the door. Digital Display Window will go blank. DIGITAL DISPLAY WINDOW PROG 1 PROG 2 PROG 2 G. PROGRAM LIST PAD INSTRUCTION 1 Open the door and leave it open. The oven lamp will turn on and "0" will appear. 2 STOP/ RESET While pressing Stop/Reset pad, press Start pad. START All currently programmed information (the program set into each Number/Memory pad (A/B sides), Beep Tone, and Program Lock information) will continuously appear. DIGITAL DISPLAY WINDOW e.g. PROG 1 PROG 1 PROG 2 PROG HI MED MED H. CYCLE COUNTER XXTo Check The Number Of Cycles That The Oven Has Been Used In Manual Mode: PAD INSTRUCTION 1 Open the door and leave it open. The oven lamp will turn on and "0" will appear. DIGITAL DISPLAY WINDOW 2 STOP/ RESET While pressing Stop/Reset pad, press Power Level Selector pad. e.g. POWER/ LEVEL The number of cycles that the oven has been used in manual mode will appear. - 13 -