Panasonic NN-SC678C Owners Manual - Page 12

Cooking 1 Operation (continued) Setting a Standing Time 3 1 TURBO DEFROST If cooking at high power (10), Press START; the cooking will start and the time will count skip to step 2. Press POWER down in the display. At the LEVEL until the desired power end of cooking, five beeps level appears in the display. PL10 will sound. is the highest and PL1 is the lowest. NOTES: 1. For reheating, use PL10 (HIGH) Press once Power Level PL10 (HIGH) for liquids, PL7 (MED-HIGH) for most foods, and P6 (MEDIUM) for dense foods. twice 3 times 4 times PL9 PL8 PL7 (MED-HIGH) 2. For defrosting, use PL3 (MED-LOW). 5 times 6 times 7 times 8 times 9 times 10 times PL6 (MEDIUM) PL5 PL4 PL3 (MED-LOW)/ DEFROST PL2 PL1 (LOW) DO NOT OVERCOOK: This oven requires less time to cook than older units. Overcooking will cause food to dry out and may cause a fire. A microwave oven's cooking power tells you the amount of microwave power available for cooking. 2 Set Cooking Time using the Number pads. For all power levels, the max. working time is 99 mitues,99 seconds. Stage Cooking: For more than one stage of cooking, repeat steps 1 and 2 for each stage of cooking before pressing START. The maximum number of stages for cooking is three. When operating, two beeps will sound between each stage. Five beeps will sound at the end of the entire sequence. Some recipes call for a standing time after cooking. To do this, repeat steps 1 and 2 in the Cooking section on the left. Then press TIMER . Note: Do not skip step 1, even use high power PL10. 2 Set desired amount of stand time using Number pads (up to 99 minutes, 99 seconds). 3 Press START. The timer will start and then beep twice at the end of cooking time (the beginning of standing time). Five beeps will sound when standing time is done. 9