Panasonic NN-SC678C Owners Manual - Page 14

Operation (continued) Quick 30 (Set or add cooking time in 30 seconds increments) 1 Press QUICK 30 until the desired cooking time (up to 5 minutes) appears in the display. Power Level is pre-set at PL10. 2 Press START; the cooking will start and the time will count down in the display. At the end of cooking, five beeps will sound. Keep Warm (Will keep food warm for up to 30 minutes after cooking) 1 TURBO DEFROST Press KEEP WARM. 2 Set warming time using Number pads, up to 30 minutes. This example shows two minutes. At the end of warming, five beeps will sound. Popcorn (Example: To pop 3.5 oz (100 g). of popcorn) 1 SENSOR REHEAT Press POPCORN until the desired size appears in the display. Once for 3.5 oz (100g), twice for 3.0 oz (85 g), or three times for 1.75 oz (50 g). 2 If desired, press MORE once to add 10 seconds or twice to add 20 seconds. Press LESS once to subtract 10 seconds or twice to subtract 20 seconds. 3 NOTES: 1. Pop one bag at a time. 2. Place bag in oven according to manufacturers' directions. 3. Start with popcorn at room temperature. 4. Allow popped corn to sit unopened for a few minutes. 5. Open bag carefully to prevent burns, because steam will escape. 6. Do not reheat unpopped kernels or reuse bag. 7. If popcorn is of a different weight than listed, follow instructions on popcorn package. 8. Never leave the oven unattended. 9. If popping slows to 2 to 3 seconds between pops, stop oven. Overcooking can burn popcorn or cause fire. 10. When popping multiple bags one right after the other, the cooking time may vary slightly. This does not affect the popcorn results. NOTES: 1. If desired, you can use other power levels. Select desired power level before pressing QUICK 30. 2. After setting the time by Quick 30 pad, you cannot use the Number Pads. 3. Quick 30 pad can also be used to add more time during manual cooking. Press START; the cooking will start and the time will count down in the display. At the end of cooking, five beeps will sound. NOTES: Keep Warm can be set as the final stage after cook time has been manually entered. It cannot be used with sensor or auto features. Press START; the cooking will start and the time will count down in the display. At the end of cooking, five beeps will sound. 11