Panasonic PT47WXD64J PT47WXD64 User Guide - Page 11
Hdmi Input Connection
View all Panasonic PT47WXD64J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH HDMI (High Definition Multimedia Interface) input connection About HDMI HDMI is the first all digital consumer electronics A/V interface that supports several uncompressed standard, enhanced and high definition video format as well as existing multi-channel audio format. One jack supports both video and audio information. The HDMI/HDCP1 input can be connected to an EIA/CEA 8612 compliant consumer electronic device, such as a set top box or DVD player equipped with a HDMI or DVI output connection. By inputting a High-bandwidth Digital Content Protection (HDCP) high definition picture source to the HDMI terminal of this PTV, high definition pictures can be displayed on the screen in their digital form. The HDMI input terminal is not intended to be used with personal computers. This PTV is compatible with 1080i, 480p and 480i formats. Select the output of the connecting to device to match that of the PTV. Notes: 1. HDMI/HDCP = High Definition Multimedia Interface / High-Bandwidth Digital Copy Protection. 2. EIA/CEA-861 Profiles compliance covers profiles for transmission of uncompressed digital video including high bandwidth digital content protection. Compatible formats This PTV is compatible with following formats. Please set the connecting device to following format. Video signal Format No of dots Vertical scanning frequency (Hz) 1080i 1920 x 1080i 59.94 / 60 540p (480p) 720 x 480p 640 x 480p 59.94 / 60 59.94 / 60 540p (480i) 720 x 480i 59.94 / 60 Audio signal When digital audio is included in the HDMI connection, the compatible sampling frequencies are 48 KHz / 44.1Khz / 32 Khz. OPTIONAL EQUIPMENT CONNECTIONS Connection diagram Follow the diagram below to connect the PTV to a set top box or a DVD player. Incoming Cable ANT A Cable In ANT B CableCARDTM INTERFACE HDMI SERVICE ONLY AV IN TERMINALS ON BACK OF PROJECTION TELEVISION VIDEO Y PB S-VIDEO PR VIDEO L L L AUDIO IN R 1 2 AUDIO COMPONENT VIDEO INPUT INPUT 1 R INPUT INPUT PROG TO AUDIO 2 3 OUT AMP DIGITAL AUDIO OUT R L HDMI OUT CABLES NOT SUPPLIED AUDIO OUT R EXTERNAL DIGITAL COMPONENT * The connector on the PTV is HDMI Type A connector. Procedure • Connect the HDMI output from the set top box or a DVD player to the HDMI input on the back of the PTV. • Press TV/VIDEO button on the remote control to select HDMI input. The connector on the PTV is HDMI Type A connector. • If the external device has DVI output only, use a DVI to HDMI adaptor cable*3 to connect to the HDMI jack on the PTV. Also, connect the Audio Out signal from the external device (set top box or DVD player) to the Audio In*4 jacks below the HDMI input. • If you cannot display the picture because of your Digital Set Top Box does not have a Digital Out terminal setting, use the Component Video Input (or the S-Video Input or Video Input). In this case, the picture will be displayed as an analog signal. Notes: *3. HDMI-DVI conversion cable (TY-SCH03DH) available on Panasonic Website: www.panasonic.com. *4. Please refer to pages 22 and 23 for Audio setting detail. 9 z