Panasonic PT47X54J PT47X54 User Guide - Page 7
Installation - model
View all Panasonic PT47X54J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ENGLISH Installation Television Location This unit can be used as part of an entertainment center. Consult your dealer for available options. • Avoid excessive sunlight or bright lights, including reflections. • Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure. • Fluorescent lighting may reduce remote control transmitting range. • Keep away from magnetic equipment, including motors, fans and external speakers. Optional Cable Connections Shielded audio and video cables should be used between components. For best results: • Use 75-ohm coaxial shielded cables. • Use appropriate input and output connectors that match your component connectors. • Avoid long cables to minimize interference. AC Power Supply Cord CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT Polarized plug USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS. Cable / Antenna Connection For proper reception, either a cable or antenna connection is required. Cable Connection Incoming Cable from Connect the cable supplied by your local Cable Company cable company. Tighten with fingers only. Use of any tool (e.g. pliers) for tightening may result in tuner damage. Note: A cable converter box may be required for proper reception. 75 Ohm VHF/UHF on back of TV Check with your local cable company for compatibility requirements. Antenna Connection For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. • Connect home antenna to ANT Incoming Cable from connection on back of television. Home Antenna Note: Cable Mode is preset at the factory. INSTALLATION External Shelf (mounted on top) (models PT-W4734X, PT-47X54 and PT-53X54 only) For your convenience, optional devices such as an HDTV Receiver, a Satellite Receiver, a Cable Box, a DVD player, a VCR or a center channel speaker can be placed on this shelf. CAUTION: The weight limit of this shelf must not exceed 25 lbs. Remote Control Battery Installation Requires two AA batteries (supplied). Battery Polarity AA / 1.5A 1 2 AA / 1.5A AA / 1.5A AA / 1.5A 3 Procedure 1. Turn the remote control face down. Remove battery cover by pressing down on the marking on the cover and sliding it off in the direction indicated. 2. Install batteries matching (+) and (-) polarity signs. 3. Replace the battery cover by sliding in reverse until the lock snaps. Note: Incorrect installation can cause battery leakage and corrosion that will damage the Remote Control. Precautions • Replace batteries in pairs. • Do not mix battery types (zinc carbon with alkaline). • Do not recharge, heat, short-circuit, disassemble, or burn batteries. 5 z