Panasonic PTF200 Lcd Projector - Commercial Use - Page 11
About Your Projector, Remote control - pt f200ntu
View all Panasonic PTF200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Preparation About Your Projector Remote control POWER button While the MAIN POWER is on, switch between stand-by mode and projection mode. (page 20) Project a laser pointer. (page 24) Display the MAIN MENU. (page 27) Navigate through the menus with FGIH, and activate the menu item with ENTER. (page 27) Capture the projected image as a frozen picture. (page 25) Reset some of the settings to the factory default settings. (page 25) MULTI-LIVE is only for PT-F200NTU. See CD-ROM contents. Control to change the scale by means of digital zoom. (page 26) Control to adjust the volume of the speakers. (page 26) Automatically adjust the setting of DOT CLOCK, CLOCK PHASE and SIGNAL SEARCH for the projected image of COMPUTER signal. (page 23) INPUT SELECT buttons Switch the required input signal button to select. NETWORK button is only for PT-F200NTU. See CD-ROM contents. PAGE buttons are only for PT-F200NTU. See CD-ROM contents. Return to the previous menu. (page 27) Turn off the projection temporarily. Display the frozen image while the display of subsequent images continues. (page 25) COMPUTER SEARCH button is only for PT-F200NTU. See CD-ROM contents. Battery compartment 1. Press the tab and lift up the cover. 2. Insert the batteries according to the polarity diagram indicated inside. Attaching a hand strap You can attach a favorite strap on to the Remote control. Top view Remote control signal and Laser pointer beam emitters. (page 23) Remote control indicator If you press any button except the LASER button, the Remote control indicator will flash. If you press the LASER button, it will lit. Remote control indicator NOTE: • Do not drop the Remote control. • Avoid contact with liquids or moisture. • Use manganese batteries or alkaline batteries with the Remote control. • Do not attempt to modify or disassemble the Remote control. Contact an Authorized Service Center for repairs. • Do not keep pressing the Remote control buttons as this may shorten battery life. • Do not point the laser in other people's eyes or stare into beam. • See "Remote control operation" on page 23. ENGLISH - 11