Panasonic PVC2062 PVC2062 User Guide - Page 32

Cable Box Universal Remote Control Feature Universal Remote Control is... The Remote Control may be set up to control some basic DSS or Cable box functions. The Universal Remote Control Setup 1 Find your DSS box or Cable box Brand Code Number from one of the charts on the next page. 2 Setup remote. Hold down DSS CABLE and press number keys to enter code. • For code 100 or greater, first press 100 key, then the remaining digits. E.g. for 102, press 100, then press 0, and then press 2. POWER COMBO DSS/ CABLE 3 Confirm code entry. Press POWER* to turn selected unit ON or OFF. • See below for controllable functions in each mode. Notes • Please repeat the Universal Remote Control Setup after replacing remote control batteries. • The remote control will not operate all DSS receivers or Cable Boxes made by the manufactures listed. If you get no results, your particular brand cannot be controlled. NUMBER Keys ENTER Using the Universal Remote Control Once the remote control has been properly set up, you can select COMBO, DSS or CABLE mode depending on which functions you wish to control. (See below.) Press COMBO or DSS CABLE on the remote control to select the desired mode. (See below for buttons available in each mode.) Set to COMBO: • All TV and VCR functions. Set to DSS CABLE: • Basic VCR functions, e.g. PLAY, REC, etc. • CABLE/DSS functions, e.g. POWER, ENTER, number keys (except 100 key), CH UP/DOWN. Model PV-C2062 remote shown. 32 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]