Panasonic PVC2062 PVC2062 User Guide - Page 35

Before Requesting Service Check the following points once again if you are having trouble with your unit. Power No power... Correction • Completely insert Power Plug into an AC outlet. • Set POWER button to ON. Monitor Correction No picture or sound... • Make sure your antenna system (TV or CABLE), is correctly set. (P. 8) • Completely insert Power Plug into an AC outlet. • Set POWER button to ON. Poor picture with normal sound... • Adjust BRIGHTNESS, SHARPNESS, and PICTURE controls in the SET UP TV menu. (P. 21) Poor sound with normal picture... • Adjust VOLUME control. (P. 14) Poor TV reception... • Adjust SHARPNESS and PICTURE controls in the SET UP TV menu. (P. 21) No color or poor color... • Adjust TINT and COLOR controls in the SET UP TV menu. (P. 21) Ghost (multiple) images... • Install a directional antenna. TV programs cannot be watched... • Make sure the selected channel is in unit's memory. (P. 10, 11) Channel cannot be selected... • Only the channel being recorded can be viewed on this unit. VCR Correction TV program cannot be • Make sure your antenna system (TV or CABLE), is correctly set. (P. 8) recorded... • Make sure cassette record tab is intact. (P.3) • Check that clock is set to current time and date. Timer recording cannot be • Make sure DSS/CABLE box (if used) is left on and tuned to performed... channel to be recorded. • Set recording Start/Stop times correctly. (P. 22-23) • Timer recording may not be performed or continued if a power interruption of more than 1 minute occurs before or during a Timer recording even after power is restored. No playback picture, or the playback • Adjust TRACKING control in either direction. (P. 4) picture is noisy or contains streaks... • Try Head Cleaning. (P. 4) VCR cannot be controlled... • Make sure VCR LOCK is set to off. (P. 27) • Make sure unit is not in a Timer Record operation. Remote Control Unit cannot be controlled... ACTION, PROG and FM/TV buttons cannot be selected... Correction • Aim remote at remote sensor on unit (P. 7) so that signal is unobstructed. • Inspect the remote batteries. (P. 3) • Make sure VCR LOCK is set to off. (P. 27) • Exposing unit remote sensor to direct fluorescent or outdoor light may cause signal interference. • Check remote batteries. Miscellaneous Correction Video cassette cannot be inserted... • Insert the cassette window side up; record tab facing you. Video cassette cannot be removed... • Completely insert Power Plug into an AC outlet. Tape cannot be ejected or inserted... • Try ejecting or inserting the tape again after turning POWER off, then back on. Video cassette ejects when a • Make sure cassette record tab is intact. (P. 3) recording is started, or the power is turned off for timer recording... In Stop mode, the VCR motor • To enable Quick Play mechanism, the VCR cylinder will rotate for (CYLINDER) continues to rotate... about 3 minutes. This reduces response time from Stop to Play mode and from Play to Rewind Search mode. VCR cannot be controlled... • Make sure VCR LOCK is set to off. (P. 27) If you cannot resolve the problem, please call the Customer Satisfaction Center for product assistance at 1-800-211-PANA(7262). To locate an authorized servicenter call toll free 1-800-211-PANA(7262) or send e-mail to : [email protected]. 35 For Your Information