Panasonic PVC2062 PVC2062 User Guide - Page 9

Initial Setup *Important: If a remote control button does not work when pressed, press the COMBO button on the remote and try the button again. Manual Clock Set If AUTO CLOCK SET was incomplete, manually set the clock as follows. 1 Press ACTION on the Remote to display SET CLOCK Menu screen. SET CLOCK 1/ / : DST : ON SELE CT MONTH SELECT : SET : END : ACT I ON 2 Press to select the month and press to set. In the same manner, select and set the date, year, time, and DST. (Daylight Saving Time) SET CLOCK 2 / 6/2002 WED 12:00PM DST : ON SET COMPLETED SET : START : ACT I ON 3 Press ACTION twice to start CLOCK and exit. Reset all unit Memory Functions When moving unit to a new location, or if a mistake was made in the Initial Setup section. • Make sure a tape is not inserted in the unit. VIDEO IN AUDIO IN POWER VOL CH STOP/EJECT REW/ PLAY/REPEAT FF/ REC TIMER/FM ACTION REC ON TIMER PROG TIMER 1 Turn the unit Power on. 2 Press and hold both PLAY and FF on the unit for more than 5 seconds. • The power will shut off. • Please ignore "NO CASSETTE" warning. 3 Do "Initial Setup" on page 8. POWER ACTION SELECT/SET :CH UP :CH DOWN :VOL UP :VOL DOWN Note to CABLE System Installer This reminder is provided to call the CABLE (Cable TV) System Installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Model PV-C2062 remote shown. 9