Panasonic RX-D550 Owners Manual - Page 10

Listening to FM radio You can preset up to 30 FM channels. Channel 1 to 5 will be set under [1] to [5] on this unit. (l right, "Changing the stations stored under [1] to [5]") Preparation ≥ Extend the antenna. (l 5) ≥ Turn the unit on. ≥ Press [O, N SELECT] repeatedly to select "FM". (Alternatively, press [FM] on the unit.) Presetting stations automatically 1 Press [PLAY MENU] to select "A.PRESET". 2 Press [3, 4] to select "LOWEST" or "CURRENT" and then press [OK]. LOWEST: To begin auto preset with the lowest frequency ("FM 87.9" or "FM 87.5"). CURRENT: To begin auto preset with the current frequency.§ ≥ The tuner starts to preset all the stations it can receive into the channels in ascending order. ≥ To cancel, press [∫]. §: To change the frequency, refer to "Manual tuning". Listening to a preset channel 1 Press [PLAY MENU] repeatedly to select "TUNE MODE". 2 Press [3, 4] to select "PRESET" and then press [OK]. 3 Press [:/6] or [5/9] to select the channel. ≥ You can select channel 1 to 5 by pressing one of [1] to [5] on this unit. ∫ Manual tuning 1 Press [PLAY MENU] repeatedly to select "TUNE MODE". 2 Press [3, 4] to select "MANUAL" and then press [OK]. 3 Press [:/6] or [5/9] to tune in to the station. To tune automatically, press and hold the button until the frequency starts changing quickly. Presetting stations manually 1 While listening to the radio broadcast Press [OK]. 2 Press [3, 4] to select the channel and then press [OK]. ≥ Do steps 1 through 2 again to preset more stations. ≥ A station previously stored is overwritten when another station is stored in the same channel preset. Changing the stations stored under [1] to [5] (On this unit) You can change the stations stored under [1] to [5] easily. While listening to the radio broadcast Press and hold one of [1] to [5] until "P " appears on the display. (" " stands for a number.) ≥ When you change the stations stored under [1] to [5], channel 1 to 5 are also changed to the same corresponding stations. ∫ To display the current FM signal status Press [DISPLAY]. "FM ST": FM stereo broadcast is being received. "FM - - - -": No broadcast is received or FM broadcast received is weak or in monaural. "FM MONO": You have set the "FM MODE" to "MONO". (l 14, "If noise is excessive during FM reception.") ≥ "STEREO" is displayed when this unit tunes to a stereo broadcast. - 10 -