Panasonic RX-D550 Owners Manual - Page 8

Bluetooth® operations You can listen to the sound from the Bluetooth® audio device from this unit wirelessly. ≥ Refer to the operating instructions of the Bluetooth® device for details. Connecting via Bluetooth® menu Preparation ≥ Turn on the Bluetooth® feature of the device and place the device near this unit. ∫ Pairing with Bluetooth® devices 1 Press [ ] to select "BLUETOOTH". 2 ≥ If "PAIRING" is indicated on the display, go to step 3. Press [PLAY MENU] to select "PAIRING" and then press [OK]. ≥ Alternatively, press and hold [ sPAIRING] on the unit until "PAIRING" appears. 3 Select "RX-D550" from the Bluetooth® device's Bluetooth® menu. ≥ The MAC address (alpha-numerical string that is unique to each set) may be displayed before "RX-D550" is displayed. ≥ The name of the connected device is indicated on the 4 display for a few seconds. Start playback on the Bluetooth® device. ∫ Connecting a paired Bluetooth® device 1 Press [ ] to select "BLUETOOTH". 2 ≥ "BLUETOOTH READY" is indicated on the display. Select "RX-D550" from the Bluetooth® device's Bluetooth® menu. ≥ The name of the connected device is indicated on the 3 display for a few seconds. Start playback on the Bluetooth® device. Bluetooth® transmission mode You can change the transmission mode to prioritize transmission quality or sound quality. Preparation ≥ Press [ ] to select "BLUETOOTH". ≥ If a Bluetooth® device is already connected, disconnect it. 1 Press [PLAY MENU] repeatedly to select "LINK MODE". 2 Press [3, 4] to select the mode and then press [OK]. MODE 1: Emphasis on connectivity MODE 2: Emphasis on sound quality ≥ Select "MODE 1" if the sound is interrupted. ≥ When enjoying video contents with this function, the video and audio output may not be synchronized. In this case, select "MODE 1". ≥ The factory default is "MODE 2". Bluetooth® input level If the sound input level from the Bluetooth® device is too low, change the input level setting. Preparation ≥ Connect a Bluetooth® device. 1 Press [PLAY MENU] repeatedly to select "INPUT LEVEL". 2 Press [3, 4] to select the level and then press [OK]. "LEVEL 0" ,. "LEVEL i1" ,. "LEVEL i2 J ≥ If prompted for the passkey, input "0000". ≥ You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used the longest will be replaced. ≥ This unit can only be connected to one device at a time. ≥ When "BLUETOOTH" is selected as the source, this unit will automatically try and connect to the last connected Bluetooth® device. ("LINKING" is indicated on the display during this process.) If the connection attempt fails, try to establish a connection again. ≥ Select "LEVEL 0" if the sound is distorted. ≥ The factory default is "LEVEL 0". Disconnecting a Bluetooth® device 1 While a Bluetooth® device is connected: Press [PLAY MENU] repeatedly to select "DISCONNECT?". 2 Press [3, 4] to select "OK? YES" and then press [OK]. ≥ To cancel, select "OK? NO". ≥ You can also disconnect the Bluetooth® device by pressing and holding [ sPAIRING] on the unit until "PAIRING" appears. ≥ The Bluetooth® device will be disconnected if a different audio source (e.g., "CD") is selected. - 8 -