Panasonic SAAK220 SAAK220 User Guide - Page 12
Other Functions, Using An External Unit, Using Headphones (not Included)
View all Panasonic SAAK220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Other functions AUX PHONES VOLUME Using an external unit (See page 4 for external unit connection.) 1. Press [AUX]. The unit comes on. 2. For listening: Proceed to step 3. For recording: Press [a, REC] (recording starts). 3. Start playback from the external source. (For details, refer to the external unit's instruction manual.) Using headphones (not included) Reduce the volume level and connect the headphones. Plug type: 3.5 mm (1/8˝) stereo Note Avoid listening for prolonged periods of time to prevent hearing damage. Turning the demo function on/off When the unit is first plugged in, a demonstration of its functions may be shown on the display. If the demo setting is off, you can show a demonstration by selecting "DEMO ON". Press and hold [DISP, -DEMO]. The display changes each time the button is held down. NO DEMO (off) ↔ DEMO ON (on) While in the standby mode, select "NO DEMO" to reduce power consumption. Note DEMO function cannot be turned on when Dimmer is on. Auto-off function Remote control only When CD or tape is selected as the source To save power, the unit turns off if it is left unused for ten minutes. This function does not work if the source is tuner or AUX. Press [SHIFT] + [AUTO OFF]. "AUTO OFF" is shown on the display. The setting is maintained even if the unit is turned off. If you select tuner or AUX as the source, "AUTO OFF" goes out. It comes on again when you select CD or tape. To cancel Press [SHIFT] + [AUTO OFF] again. Setting the time Remote control only This is a 12-hour clock. 1 Switch on the power. 2 Press [SHIFT] + [CLOCK/TIMER] to select "CLOCK". Every time you press the button: CLOCK PLAY REC Previous display 3 (Within 7 seconds or so) Press [g, REW/3] or [f, 4/FF] to set the time. 4 Press [SHIFT] + [CLOCK/TIMER] to finish setting the time. The display will return to whatever was displayed before you set the time. To display the time Press [SHIFT] + [CLOCK/TIMER] once when the unit is on or at standby mode. The time is shown for about 5 seconds. Note Reset the clock regularly to maintain accuracy. Convenient functions To dim the display panel Remote control only Press [DIMMER]. The display is dimmed and the indicators are turned off. (The AC supply indicator remains on.) Press [DIMMER] again to restore the display. To mute the volume Remote control only Press [MUTING]. Press the button again to cancel. "MUTING" goes out. To cancel from the unit, turn [VOLUME] to minimum (--dB), then raise it to the required level. Muting is also cancelled when the unit is turned off. 12 RQT7528