Panasonic SAAK410 SAAK410 User Guide - Page 19
SPECIFICATIONS, Timer operations, Reference
View all Panasonic SAAK410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Specifications AMPLIFIER SECTION SC-AK410 Power output THD 10%, both channels driven 60 Hz-3 kHz (Low channel) 58 W per channel (6 Ω) 3 kHz-16 kHz (High channel) 58 W per channel (6 Ω) Total Bi-Amp power 116 W per channel Power output THD 10%, both channels driven 1 kHz (Low channel) 75 W per channel (6 Ω) 10 kHz (High channel) 75 W per channel (6 Ω) Total Bi-Amp power 150 W per channel Input sensitivity AUX 250 mV Input Impedance AUX 13.3 kΩ FM TUNER SECTION Frequency range 87.9-107.9 MHz (200 kHz steps) 87.5-108.0 MHz (100 kHz steps) Sensitivity 2.5 µV (IHF) S/N 26 dB 2.2 µV Antenna terminal(s) 75 Ω (unbalanced) AM TUNER SECTION Frequency range 520-1710 kHz (10 kHz steps) Sensitivity S/N 20 dB (at 1000 kHz) 560 µV/m CASSETTE DECK SECTION Track system 4 track, 2 channel Heads Record/playback Solid permalloy head Erasure Double gap ferrite head Motor DC servo motor Recording system AC bias 100 kHz Erasing system AC erase 100 kHz Tape speed 4.8 cm/s (17/8 ips) Overall frequency response (+3 dB, -6 dB at DECK OUT) NORMAL (TYPE I) 35 Hz-14 kHz S/N 50 dB (A weighted) Wow and flutter 0.18% (WRMS) Fast forward and rewind time Approx. 120 seconds with C-60 cassette tape CD SECTION Sampling frequency 44.1 kHz Decoding 16 bit linear Beam source/wavelength Semiconductor laser/780 nm Number of channels Stereo Frequency response 20 Hz-20 kHz (+1, -2 dB) Wow and flutter Below measurable limit Digital filter 8 fs D/A converter MASH (1 bit DAC) MP3 Bit rate 32 kbps-320 kbps Sampling frequency 32 kHz, 44.1 kHz, 48 kHz SPEAKER SECTION Front speakers SB-AK410 Type Speaker(s) Woofer Tweeter Super tweeter Impedance HIGH LOW Input power 3 way, 3 speaker system 16 cm (61/2˝) cone type 6 cm (23/8˝) cone type 2.5 cm (1˝) Piezo type 6 Ω 6 Ω HIGH 150 W (Music) LOW 150 W (Music) Output sound pressure level 86.5 dB/W (1.0 m) Cross over frequency 3.5 kHz, 10 kHz Frequency range 35 Hz-25 kHz (-16 dB) 47 Hz-24 kHz (-10 dB) Dimensions (WxHxD) 227 x 344 x 250 mm (815/16˝ x 1317/32˝ x 927/32˝) Mass 3.4 kg (7.5 lb.) GENERAL Power supply AC 120 V, 60 Hz Power consumption 225 W Dimensions (WxHxD) 250 x 330 x 370 mm Mass (927/32˝ x 13˝ x 143/8˝) 7.8 kg (17.1 lb.) Power consumption in standby mode: 0.34 W Note: 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. 3. SB-AK410 The labels "HIGH" and "LOW" on the rear of the speakers refer to High frequency and Low frequency. Timer operations Reference 19 RQT6707