Panasonic SAAK410 SAAK410 User Guide - Page 7

Cassette deck operations The radio: manual tuning CLOCK / PL AY/ AUTO OFF TIMER REC SLEEP CD DISP DIMMER DISC 1 PROGRAM GHI 4 PLAY MODE PQRS 7 R E P E AT DEL ABC DEF 23 JKL MNO 56 TUV WXYZ 89 SPACE 0 10 CD TUNER BAND CLEAR AUX TAPE VOL ALBUM VOL CURSOR REW FF INTRO MARKER TITLE SEARCH ENTER S.WOOFER SHIFT S.SOUND EQ PRESET EQ MUTING 1 Press [TUNER/BAND] to select band. The unit comes on. Every time you press the button: FM ↔ AM 2 Press [PLAY MODE] on the remote control to select "MANUAL". Every time you press the button: MANUAL ↔ PRESET 3 Hold down [g/REW/3] or [f/FF/4] for a moment to search for a station. The frequency stops when it finds a clear station. To stop during the process, press [g/REW/3] or [f/FF/4]. Under excessive interference, a station may not be found. Press [g/REW/3] or [f/FF/4] repeatedly to tune step-bystep. "TUNED" is displayed when a radio station is tuned. "ST" is displayed when a stereo FM broadcast is being received. If noise is excessive in FM Remote control only Hold down [PLAY MODE] to display "MONO". Monaural sound is selected and noise reduces when reception is weak. Hold down [PLAY MODE] again to cancel the mode. "MONO" is also cancelled if the frequency is changed. To receive FM broadcasts allocated in 0.1 MHz steps Main unit only Hold down [TUNER/BAND]. The display changes in a few seconds to show the current minimum FM frequency. Continue to hold down the button until the minimum frequency changes. The step is changed. Repeat the above to change the step back. Note • After changing the "allocation" setting, the frequencies you previously preset in the memory will be cleared. • Sound is momentarily interrupted if you load/unload tapes while listening to an AM broadcast. The radio: preset tuning Remote control only There are two methods of pre-setting stations. Automatic presetting : All the stations the tuner can receive are preset. Manual presetting : You can select the stations to preset and the order they are preset in. Up to 15 stations each can be set in the FM and AM bands. CLOCK / PL AY/ AUTO OFF TIMER REC SLEEP CD DISP DIMMER DISC 1 PROGRAM GHI 4 PLAY MODE PQRS 7 R E P E AT DEL ABC DEF 23 JKL MNO 56 TUV WXYZ 89 SPACE 0 10 CD TUNER BAND CLEAR AUX TAPE VOL ALBUM VOL CURSOR REW FF INTRO MARKER TITLE SEARCH ENTER S.WOOFER SHIFT S.SOUND EQ PRESET EQ MUTING Preparation: Press [TUNER BAND] to select "FM" or "AM". Automatic presetting Do the following once each for FM and AM. Preparation: Tune to the frequency where pre-setting is to begin. Hold down [PROGRAM] until the frequency changes. The tuner presets all the stations it can receive into the channels in ascending order. When finished, the last station memorized is tuned in. Manual presetting Pre-set the stations one at a time. 1 Press [PROGRAM] then press [g, REW/3] or [f, 4/FF] to tune to the desired station. 2 Press [PROGRAM] then press [g, REW/3] or [f, 4/FF] to select a channel. 3 Press [PROGRAM]. The station occupying a channel is erased if another station is preset in that channel. Selecting channels Press the numbered buttons to select the channel. To enter channel 10 or over, press [X10], then the two digits. OR 1 Press [PLAY MODE] to select "PRESET". 2 Press [g, REW/3] or [f, 4/FF] to select the channel. Recording operations 7 RQT6707