Panasonic SAHE75 SAHE75 User Guide - Page 10

4 Step 1 2 3 Basic operations 1 POWER 8 2 SPEAKERS Switch on. Turn SPEAKERS on. SPEAKERS STEREO mode SPEAKERS L R SOUND MODE STEREO Use this mode to play digital or analog stereo sources or to play surround sources through two speakers. When surround sources are played in this mode, the sounds intended for the other speaker channels are played through the front speakers. 3 INPUT SELECTOR DIGITAL INPUT , / / Select input. TUNER ,/ CD ,/ DVD TAPE ,/ VCR 2 ,/ VCR 1 ,/ TV For CD, DVD, TV Select digital or analog input. / 4 DSP SOUND MODE Select the DSP sound mode. 5 Start play of the source. Step 4 6 VOLUME DOWN Adjust the volume. UP When you finish listening Be sure to reduce the volume and press [POWER, 8] to switch the unit to standby. For your reference In rare cases, the unit may have trouble recognizing the digital signals on discs. ¡ With the PCM signals on CDs, this may cause the beginning of a track to be cut off. Engage the PCM FIX mode if this occurs. ¡ With DTS, the signals may not be recognized at all. Engage the DTS FIX mode if this occurs. While the input source is selected and digital input is engaged: Press and hold [DIGITAL INPUT]. The current mode is displayed. Press again to change the mode. Each time you press the button: AUTO / PCM FIX / DTS FIX When a FIX mode is on, the unit cannot process other signals. This may cause noise to be output. Select "AUTO" if this occurs. The selected mode is stored for each input source even if the unit is 10 turned off. RQT6847 / SURROUND mode SPEAKERS L CR SL SR LFE SOUND MODE SURROUND DIGITAL Select this mode when you are playing a digital surround source (Dolby Digital or DTS). Also select this mode when playing analog or digital stereo sources. The Dolby Pro Logic 2 processor works not only on sources recorded with Dolby Surround, but also on any stereo source. The following modes are available when using Dolby Pro DOLBY PRO LOGIC 2 Logic 2. SFC modes SPEAKERS SOUND MODE SFC Enjoy an enhanced sound experience with greater presence and spread by using these SFC (sound field control) modes with PCM or analog stereo sources. The SFC modes cannot be used if the input signal is Dolby Digital or DTS. Choose from the following modes. SFC MODE < > Notes on using the Digital Signal Processor The digital signal processor in this unit can decode the following signals: ¡Dolby Digital ¡DTS ¡PCM It cannot decode: ¡Other digital signals, such as MPEG ¡PCM with sampling frequencies of 88.2 kHz, 96 kHz, 176.4 kHz or 192 kHz ¡Dolby Digital RF signals from a laser disc player