Panasonic SAPM533 SAPM53 User Guide - Page 11
Timer
View all Panasonic SAPM533 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH Timer Setting the clock This is a 12-hour clock. 1 Press [CLOCK/TIMER] to select "CLOCK". Each time you press the button: CLOCK ˚ PLAY ˚ REC Original display 2 Within 5 seconds, press [4/REW/4] or [3/FF/¢] to set the time. Using the play or record timer You can set the timer to come on at a certain time to wake you up (play timer) or to record from the radio or a music port source (record timer). Preparation Turn the unit on and set the clock. Timer Play timer Action Prepare the music source you want to listen to; cassette, disc number (1-5), radio or music port source, and set the volume. Record timer Check the cassetteʼs erasure prevention tabs (refer to page 9), insert the cassette and tune to the radio station (refer to page 10) or select music port source (refer to page 13). 1 Press [CLOCK/TIMER] repeatedly to select your desired timer. CLOCK ˚ PLAY ˚ REC Original display 2 Within 5 seconds, press [4/REW/4] or [3/FF/¢] to set the starting time. Start time English English 3 Press [CLOCK/TIMER] again to confirm. Displaying the clock Press [CLOCK/TIMER] to display the clock for a few seconds. Note The clock may lose or gain minutes over a period of time. Readjust as necessary. Using the sleep timer This function enables you to turn off the unit automatically after the set time. Press [SLEEP] repeatedly to select your desired time. 30MIN 60MIN 90MIN 120MIN OFF Sleep timer indicator To cancel Press [SLEEP] to select "OFF". Changing the remaining time Press [SLEEP] to show the remaining time, and press [SLEEP] again to select your desired time. Note • The play and sleep timer or the record and sleep timer can be used together. • The sleep timer always has priority. Be sure not to overlap timer settings. Play timer indicator Record timer indicator 3 Press [CLOCK/TIMER] to confirm. 4 Repeat steps 2 and 3 to set the finishing time. Finish time To activate the timer 5 Press [˚PLAY/REC] to turn on your desired timer. ˚ PLAY ˚ REC no display (off) 6 Press [y] to turn off the unit. The unit must be off for the timers to operate. To enjoy the desired source after the timer setting is completed. The volume level (for play timer) and music source are stored in the timer memory and the timer will start in these preset conditions. However, the disc numbers do not get stored in the timer memory. 1. After step 5, start playing the desired source. 2. Reset the disc numbers if you have changed any of them, confirm that a disc or cassette is inserted, then press [y] to put the unit on standby. RQTV0097 11