Panasonic SAPM533 SAPM53 User Guide - Page 15
Specifications, Maintenance, When Moving The Unit
View all Panasonic SAPM533 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Specifications ENGLISH English AMPLIFIER SECTION FTC OUTPUT POWER both channel driven simultaneously 10% Total harmonic distortion 60 Hz to 3 kHz (Low channel) SC-PM53 40 W per channel (6 Ω) SC-PM533 38 W per channel (6 Ω) 3 kHz to 16 kHz (High channel) SC-PM53 39 W per channel (6 Ω) SC-PM533 36 W per channel (6 Ω) Total Bi-Amp power SC-PM53 79 W per channel SC-PM533 74 W per channel RMS OUTPUT POWER both channel driven simultaneously 10% total harmonic distortion 1 kHz (Low channel) SC-PM53 45 W per channel (6 Ω) SC-PM533 43 W per channel (6 Ω) 8 kHz (High channel) SC-PM53 45 W per channel (6 Ω) SC-PM533 42 W per channel (6 Ω) Total Bi-Amp power SC-PM53 90 W per channel SC-PM533 85 W per channel Input Impedance Music port 250 mV 12 kΩ Output Impedance Headphone 16 Ω to 32 Ω Phone jack Terminal Stereo, 3.5 mm (1/8") Music port input jack Terminal Stereo, 3.5 mm (1/8") FM TUNER SECTION Frequency range 87.9 MHz to 107.9 MHz (200 kHz steps) 87.5 MHz to 108.0 MHz (100 kHz steps) Sensitivity 0.3 µV (IHF) S/N 26 dB 0.2 µV Antenna terminals 75 Ω (unbalanced) Preset station FM 15 stations AM 15 stations AM TUNER SECTION Frequency range 520 kHz to 1710 kHz (10 kHz steps) Sensitivity S/N 20 dB (at 1000 kHz) 900 µV/m CASSETTE DECK SECTION Track system 4-track, 2-channel Heads Record/playback Solid permalloy head Erasure Double gap ferrite head Motor DC servo motor Recording system AC bias 100 kHz Erase system AC erase 100 kHz Tape speed 4.8 cm/s (17/8 ips) Overall frequency response (+3, -6 dB at DECK OUT) NORMAL 35 Hz to 14 kHz S/N RATIO 54 dB (A weighted) Wow and flutter 0.08% (WRMS) Fast-forward and rewind time Approx. 120 seconds with C-60 cassette tape CD SECTION Disc played [8 cm (3") or 12 cm (5")] (1) CD-Audio (CD-DA) (2) CD-R/RW (CD-DA, MP3, WMA formatted disc) (3) MP3/WMA Sampling frequency CD-DA 44.1 kHz MP3/WMA 32 kHz, 44.1 kHz, 48 kHz Bit rate MP3/WMA 32 kbps to 384 kbps Decoding 16/20/24 bit linear Pick up Wavelength 785 nm Beam source Semiconductor laser Laser power CLASS 1 Audio output (Disc) Number of channels 2-Channel Frequency response 20 Hz to 20 kHz (+1dB, -2 dB) Wow and flutter Below measurable limit Digital filter 8 fs D/A converter MASH (1 bit DAC) SPEAKER SECTION Type 2 way, 2 speaker system Speaker(s) Woofer 10cm (4˝) cone type (6 Ω) Tweeter 6 cm (23/8˝) cone type (6 Ω) Impedance 6 Ω Input power (IEC) HIGH 90 W (Max) LOW 90 W (Max) Output sound pressure 80 dB/W (1.0 m) Crossover over frequency 2.2 kHz Frequency range 45 Hz to 35 kHz (-16 dB) 50 Hz to 31 kHz (-10 dB) Dimensions (W x H x D) 144 mm x 249 mm x 200 mm (511/16˝ x 913/16˝ x 77/8˝) Mass 1.9 kg (4.2 lb.) GENERAL Power supply AC 120 V, 60 Hz Power consumption 140 W Dimensions (W x H x D) 175 mm x 249 mm x 355 mm (67/8˝ x 913/16˝ x 1363/64˝) Mass 5.4 kg (11.9 lb.) Operating temperature range +5°C to +35°C (+41°F to +95°F) Operating humidity range 5% to 90% RH (no condensation) Power consumption in standby mode 0.4 W Note 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. 3. The labels "HIGH" and "LOW" on the rear or the speakers refer to High frequency and Low frequency. English Maintenance When moving the unit If the surfaces are dirty To clean this unit, wipe with a soft, dry cloth. • Never use alcohol, paint thinner or benzine to clean this unit. • Before using chemically treated cloth, read the instructions that came with the cloth carefully. For a cleaner, crisper sound 1 Remove all discs. 2 Press [POWER y/I] to turn the unit off. 3 Disconnect the AC power supply cord. RQTV0097 Clean the heads regularly to assure good quality playback and recording. 15 Use a cleaning tape (not included).