Panasonic SAPM533 SAPM53 User Guide - Page 8

Discs (continued) Checking which discs are in the trays (CD CHECK) Program play CD MP3 WMA 1 Press [CD CHECK]. This function allows you to program up to 24 tracks. CD 1 Press [CD 6] and then [STOP 7]. CD CHECK 5 4 3 2 1 2 Press [PROGRAM]. 3 Press [DISC]. 4 (Within 10 seconds or so) Press [1~5] to select your desired disc. 2 Press the button again to close the trays. Note • The tray with a disc being played will not open. • If the player is stopped, all trays will open. • Do not remove or insert discs during disc check. • Do not pull out the trays during disc check. • 8 cm discs cannot be checked. Display function This function allows you to display the information of the current track. Press [DISPLAY] repeatedly during play or pause mode. CD Elapsed time Remaining time 5 Press the numeric buttons to select your desired track. 6 Repeat steps 3 to 5 to program other tracks. 7 Press [CD 6] to start play. MP3 WMA 1 Press [CD 6] and then [STOP 7]. 2 Press [DISC]. 3 (Within 10 seconds or so) Press [1~5] to select your desired disc. 4 Press [STOP 7]. 5 Press [PROGRAM]. 6 Press [ALBUM album. or ] to select your desired MP3 WMA Elapsed time Remaining time Album name Track name Tag (Artist) Tag (Track) Tag (Album) Note • Maximum number of displayable characters: approximately 30 • This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not supported will not be displayed. • ID3 is a tag embedded in MP3 tracks to provide information about the track. Advanced play Direct access play 7 Press [3/FF/¢] once and then the numeric buttons to select your desired track. 8 Press [ENTER]. Repeat steps 6 to 8 to program other tracks. 9 Press [CD 6] to start play. To Action cancel program mode Press [PROGRAM] in the stop mode. replay the program Press [PROGRAM] then [CD 6]. check program contents Press [ /REW/4] or [ /FF/¢] when "PGM" is displayed in the stop mode. To check while programming, press [PROGRAM] twice after "PGM" appears, then press [ /REW/4] or [ /FF/¢] . This function allows you to start play from a specific track. CD Press the numeric buttons to select and play your desired track. MP3 WMA 1 Press [ALBUM or ] to select the album. 2 Press [3/FF/¢] once and then the numeric buttons to select and play your desired track. For two-digit track, press [h10] once, and then the two digits. For three-digit track, press [h10] twice, and then the three digits. Note This function does not work during any random/program mode. Repeat play You can repeat program play or other selected play mode. CD MP3 WMA Press [REPEAT] before or during play. "REPEAT ON" and " " are displayed. add to the program CD Repeat step 3 to 5 in the stop mode. MP3 WMA Repeat steps 6 to 8 in the stop mode. clear the last track Press [DEL] in the stop mode. clear all programmed Press [CLEAR] in the stop mode. "CLR ALL" tracks is displayed. Note • When you try to program more than 24 tracks "PGM FULL" appears. • During program play, skipping is always in the programmed order, whether forward or backward. • You cannot program CD-DA together with MP3 and WMA tracks. • You cannot change or open other trays during program play mode. • CD During program play, you can search backward or forward only within the current track. • MP3 WMA The program memory is cleared when you change a disc or open a disc tray. RQTV0097 To cancel Press [REPEAT] again. 8 "REPEAT OFF" is displayed and " " is cleared.