Panasonic SB-G90 Owners Manual - Page 13
DO
View all Panasonic SB-G90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
English 4 Tilt the speaker forward, and screw the spikes into the two rear-side base plates. When using the spike shoes, place them under the spikes. Screw the spikes firmly until they stop. Speaker (rear) Thick mat, etc. Place each spike shoe so that the side with an indented center faces up. DO DO NOT Spike shoes 5 While aligning the tips of the spikes with the indentations on the spike shoes, slowly bring the speaker back to the upright position. 6 In the same way as Step ④ , tilt the speaker backwards and remove the thick mat (or similar). 7 Screw the spikes into the two front-side base plates. When using the spike shoes, place them under the spikes. 8 If the speakers wobble, place the spacers under the spike shoes. Spacer (13) 13
English
4
Tilt the speaker forward, and screw the spikes into the two rear-side base plates.
When using the spike shoes, place them under the spikes.
5
While aligning the tips of the spikes with the indentations on the spike shoes, slowly bring the speaker back to the upright
position.
6
In the same way as Step
④
, tilt the speaker backwards and remove the thick mat (or similar).
7
Screw the spikes into the two front-side base plates.
When using the spike shoes, place them under the spikes.
8
If the speakers wobble, place the spacers under the spike shoes.
Spike shoes
Speaker (rear)
Thick mat, etc.
Screw the spikes firmly until
they stop.
Place each spike shoe so that the
side with an indented center faces
up.
DO NOT
DO
Spacer
13
(13)