Panasonic SC-BTT465 SC-BTT405 Owner's Manual (English) - Page 36

Picture, The images from this unit do not appear

Get Panasonic SC-BTT465 PDF manuals and user guides View all Panasonic SC-BTT465 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

The TV screen turns black. ¾ When "24p Output" is set to "On", HDMI authentication takes place and a black screen is displayed. This unit does not recognize the USB connection correctly. ¾ Disconnect and re-connect the USB cable. If it still does not recognize the connection, turn this unit off and on again. ¾ USB devices may not be recognized by this unit when connected using the following : ja USB hub ja USB extension cable other than the supplied with the Wireless LAN Adaptor DY-WL5 (optional) ¾ If you connect USB HDD to this unit, use the USB cable that is supplied with the HDD. The unit switches to standby mode. ¾ This unit will automatically turn to standby mode after 30 minutes if it is inactive. (> 16) ¾ When the time set for the sleep timer has passed, the main unit will be turned off. (> 9) ¾ One of the unit's safety devices is activated. Press [Í/I] on the main unit to turn the unit on. Picture The images from this unit do not appear on the TV. Picture is distorted. Jittering occurs. ¾ An incorrect resolution is selected in "HDMI Resolution". Reset the setting as follows: 1 Turn the unit on. 2 Press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds. j"00rEt" is displayed on the unit's display. 3 Press [1] (right) repeatedly on the remote control until "04PrG" is displayed on the unit's display. 4 Press and hold [OK] for at least 5 seconds. Set the item again. (> 27) jWhen Dolby Digital Plus, Dolby TrueHD, and DTS-HD® audio are not output properly, select "Yes" in "Restore Default Settings" (> 32) and make proper settings. ¾ When "3D BD-Video Playback" in the Setup menu is set to "Auto", images may not be output depending on the connection method. After removing the disc from this unit, select "Set before play" in the Setup menu, and select "2D Playback" in the setup screen displayed when playing 3D discs. (> 28) ¾ If irregular coloring occurs on your TV, turn the TV off for about 30 minutes. If it persists, move the speakers further away from the TV. 36 VQT5F60

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
36
VQT5F60
The TV screen turns black.
¾
When “24p Output” is set to “On”, HDMI
authentication takes place and a black screen
is displayed.
This unit does not recognize the USB
connection correctly.
¾
Disconnect and re-connect the USB cable. If
it still does not recognize the connection, turn
this unit off and on again.
¾
USB devices may not be recognized by this
unit when connected using the following :
j
a USB hub
j
a USB extension cable other than the
supplied with the Wireless LAN Adaptor
DY-WL5 (optional)
¾
If you connect USB HDD to this unit, use the
USB cable that is supplied with the HDD.
The unit switches to standby mode.
¾
This unit will automatically turn to standby
mode after 30 minutes if it is inactive. (
>
16)
¾
When the time set for the sleep timer has
passed, the main unit will be turned off. (
>
9)
¾
One of the unit’s safety devices is activated.
Press [
Í
/I] on the main unit to turn the unit on.
The images from this unit do not appear on
the TV.
Picture is distorted.
Jittering occurs.
¾
An incorrect resolution is selected in “HDMI
Resolution”. Reset the setting as follows:
1
Turn the unit on.
2
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
j
“00rEt” is displayed on the unit’s display.
3
Press [
1
] (right) repeatedly on the remote
control until “04PrG” is displayed on the unit’s
display.
4
Press and hold [OK] for at least 5 seconds.
Set the item again. (
>
27)
j
When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD
®
audio are not output properly,
select “Yes” in “Restore Default Settings”
(
>
32) and make proper settings.
¾
When “3D BD-Video Playback” in the Setup
menu is set to “Auto”, images may not be
output depending on the connection method.
After removing the disc from this unit, select
“Set before play” in the Setup menu, and
select “2D Playback” in the setup screen
displayed when playing 3D discs. (
>
28)
¾
If irregular coloring occurs on your TV, turn
the TV off for about 30 minutes.
If it persists, move the speakers further away
from the TV.
Picture