Panasonic SC-GNW10 Owners Manual - Page 12

Using the SC-GNW10 Before use The SC-GNW10 is worn by placing it around your neck, on your shoulders. Wirelessly connecting the SC-GNW10 and the transmitter Turn on the SC-GNW10 Before turning on the SC-GNW10, make sure the transmitter is connected to your PC/Gaming console and powered on. The cyan operation indicator will blink. Press and hold the [Í] button for about 2 seconds until the operation indicator (R) blinks (cyan). The wireless connection between the SC-GNW10 and the transmitter starts. When the wireless connection is completed, the SC-GNW10 and the transmitter are in the following states: SC-GNW10 Operation indicator (L) Operation indicator (R) Lights (cyan)*1 Lights (cyan)*1*2 Transmitter Operation indicator Lights (cyan) *1 If the "Lighting Settings" in the app for use in Windows are set to "OFF", the indicators turn off after about 3 seconds. *2 Blinks (red) when the battery level drops to 20 %. To turn the SC-GNW10 off Press and hold the [Í] button for about 2 seconds until the operation indicator (L) blinks 3 times. • The operation indicator (L) turns off and the power of the SC-GNW10 turns off. Note: • If the SC-GNW10 and the transmitter do not connect wirelessly, try pairing again. (l 16) • If the sound is distorted, turn down the volume. • If there is an excessive input signal, the function of the SC-GNW10 may stop automatically and the power may be turned off for safety. • When connected wirelessly, if there is no sound for 5 minutes or more, the SC-GNW10 automatically turns off. (Auto off function) • The auto off function may not work in some cases when there is noise from other devices. • The settings for the auto off function can be changed in the app for use in Windows. (l 16) (Factory default: on) 12