Panasonic SC-GNW10 Owners Manual - Page 16

Pairing the SC-GNW10 and the transmitter again

Page 16 highlights

Operation Turning off the operation indicators during wireless connection (lighting settings) Changes the on/off setting for the operation indicators (cyan) that indicate SC-GNW10 is connected wirelessly to the transmitter. (Factory default: on) 1 Unplug the USB cable of the transmitter. 2 Press and hold the [ ] button for about 5 seconds until the operation indicators blink (blue). • Operation indicator (L) and operation indicator (R) blink once: Off setting • Operation indicator (L) and operation indicator (R) blink twice: On setting Note: • The setting is maintained until it is changed again. • You can also switch the lighting settings using the app for use in Windows (l 16). Pairing the SC-GNW10 and the transmitter again If wireless connection between the SC-GNW10 and transmitter is not possible, wireless connection can be achieved by pairing the units again. 1 Press and hold the [-PAIRING] button on the transmitter. • The operation indicator on the transmitter blinks rapidly (cyan). Do the following procedure with the power of the SC-GNW10 off. 2 Press and hold the [Í] button for about 6 seconds until the operation indicator (R) blinks (blue) rapidly. • Wireless connection pairing between the SC-GNW10 and the transmitter starts. When the wireless connection is completed, the SC-GNW10 and the transmitter are in the following states: SC-GNW10 Operation indicator (L) Lights (cyan) Operation indicator (R) Lights (cyan) Transmitter Operation indicator Lights (cyan) Changing settings using the app for use in Windows (SOUNDSLAYER Engine) If the transmitter is connected to a PC, you can use the app for use in Windows to change the settings for the SC-GNW10. • Equalizer settings • Adjusting speaker balance • Turning off the operation indicators (lighting settings) • Updating software etc. Refer to the following website for details about the app: https://panasonic.jp/support/global/cs/audio/download/sse/ (This site is in English only.) Note: • This app does not support Apple/macOS. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26

Operation
16
Changes the on/off setting for the operation indicators (cyan) that indicate SC-GNW10 is connected wirelessly
to the transmitter.
(Factory default: on)
1
Unplug the USB cable of the transmitter.
2
Press and hold the
[
]
button for about 5 seconds until the operation indicators blink
(blue).
Operation indicator (L) and operation indicator (R) blink once: Off setting
Operation indicator (L) and operation indicator (R) blink twice: On setting
Note:
• The setting is maintained until it is changed again.
• You can also switch the lighting settings using the app for use in Windows (
l
16).
If wireless connection between the SC-GNW10 and transmitter is not possible, wireless connection can be
achieved by pairing the units again.
1
Press and hold the [-PAIRING] button on the transmitter.
The operation indicator on the transmitter blinks rapidly (cyan).
Do the following procedure with the power of the SC-GNW10 off.
2
Press and hold the [
Í
] button for about 6 seconds until the operation indicator (R)
blinks (blue) rapidly.
Wireless connection pairing between the SC-GNW10 and the transmitter starts.
When the wireless connection is completed, the SC-GNW10 and the transmitter are in the following states:
If the transmitter is connected to a PC, you can use the app for use in Windows to change the settings for the
SC-GNW10.
• Equalizer settings
• Adjusting speaker balance
• Turning off the operation indicators (lighting settings)
• Updating software
etc.
Refer to the following website for details about the app:
https://panasonic.jp/support/global/cs/audio/download/sse/
(This site is in English only.)
Note:
• This app does not support Apple/macOS.
Turning off the operation indicators during wireless connection (lighting settings)
Pairing the SC-GNW10 and the transmitter again
SC-GNW10
Operation indicator (L)
Lights (cyan)
Operation indicator (R)
Lights (cyan)
Transmitter
Operation indicator
Lights (cyan)
Changing settings using the app for use in Windows (SOUNDSLAYER Engine)