Panasonic SC-HC300 Owners Manual - Page 12

Others Auto off This system automatically turns off when you do not use it for approximately 20 minutes. 1 Press [SETUP] repeatedly to select "AUTO OFF". 2 Press [R, T] to select "ON" and then press [OK]. To cancel, select "OFF". Note: This function does not work when you are in radio source or when a Bluetooth® device is connected. Software update Occasionally, Panasonic may release updated software for this unit that may add or improve the way a feature operates. These updates are available free of charge. For more details, refer to the following website. http://panasonic.jp/support/global/cs/ (This site is in English only.) █ Checking the software version 1 Press [SETUP] repeatedly to select "SW VER." and then press [OK]. The software version is shown. 2 Press [OK] again to exit. Bluetooth® standby This function automatically turns on the system when you establish a Bluetooth® connection from a paired device. 1 Press [SETUP] repeatedly to select "BLUETOOTH STANDBY". 2 Press [R, T] to select "ON" and then press [OK]. To cancel, select "OFF". Charging a device This system can supply power to a device, such as a smartphone, connected to the USB port. Note: • Use a cable compatible with the device. • Use the charger supplied with the device if power is not supplied to the device. • Do not use a cable or connect a device that exceeds the rated value of 5 V, 1.5 A. • Examine the screen of the device to check if charging is complete. Disconnect the device after charging. • Once fully charged, remove the USB cable from the USB port. • After the device has started charging, you can turn the unit to standby mode. - When charging a depleted device, do not turn the unit to standby mode until the device becomes operational. • Depending on the device, power may not be supplied to it. • Read the operating instructions of the device for details. TQBJ2155 12