Panasonic SC-HC300 Owners Manual - Page 7

ENGLISH █ Disconnecting a device 1 Press [ ] to select "BLUETOOTH". 2 Press [PLAY MENU] repeatedly to select "DISCONNECT?". 3 Press [R, T] to select "OK? YES" and then press [OK]. Note: A device is disconnected when you: • Select a different source. • Move the device out of the maximum range. • Disable the Bluetooth® transmission of the device. • Turn off the system or the device. Link mode You can change the link mode to suit the connection type. Preparation If this system is connected to a Bluetooth® device, disconnect it. (~above) 1 Press [PLAY MENU] repeatedly to select "LINK MODE". 2 Press [R, T] to select the mode and then press [OK]. MODE 1 MODE 2 (default) Emphasis on connectivity. Emphasis on sound quality. Note: • Depending on the device, the playback image and sound may not be synchronized. In this case, select "MODE 1". • Select "MODE 1" if the sound is interrupted. Input level You can change the input level setting if the sound input level of the Bluetooth® transmission is too low. 1 Press [PLAY MENU] repeatedly to select "INPUT LEVEL". 2 Press [R, T] to select the level and then press [OK]. Media playback The following marks indicate the availability of the feature. CD : CD-R/RW in CD-DA format or with MP3 files. USB : USB device with MP3 files. BLUETOOTH : Bluetooth® device. Basic playback CD USB BLUETOOTH Play Stop Press [4/9]. Press [8]. USB The position is memorized. "RESUME" is shown. Press again to stop fully. Pause Press [4/9]. Press again to continue playback. Skip Search Press [2/3] or [5/6] to skip track. CD USB Press [R, T] to skip MP3 album. Press and hold [2/3] or [5/6]. Note: Depending on the Bluetooth® device, some operations may not work. Viewing available information CD USB BLUETOOTH You can view the available information on the display panel. Press [DISPLAY] repeatedly. Note: • Maximum characters that can be shown: Approximately 32 • This system supports ver. 1.0, 1.1 and 2.3 ID3 tags. • Text data that the system does not support can show differently. • Example: MP3 album and track number display. Note: • The default setting is "LEVEL 0". • Select "LEVEL 0" if the sound is distorted. Album number Track number TQBJ2155 7