Panasonic SC-PM28 SAPM28 User Guide - Page 24

A To protect tapes against further recording Side A Tab for side B Tab for side A To re-record Normal position tape Adhesive tape B 3 1 C OPEN OPEN Before recording Types of tapes which can be recorded correctly The system automatically identifies the type of tape. NORMAL POSITION/TYPE I  HIGH POSITION/TYPE II ✕ METAL POSITION/TYPE IV ✕ High position and metal position tapes can be used, but the unit will not be able to record or erase them correctly. A Erasure prevention The illustration shows how to remove the tabs to prevent recording. To record on the tape again, cover as shown. The effect of volume and sound quality on recording. These have no effect on recording. They can be changed for playback. B To erase a recorded sound 1 Press [TAPE -] and then [STOP L, -DEMO]. 2 Insert the recorded cassette with the tape facing in. 3 Press [[/ J REC]. C Preparatory steps Do these steps before each recording. Wind up the leader tape so recording can begin immediately. Press [c OPEN], insert a cassette with the tape facing in. Make sure the cassette is fully inserted and close the lid by hand. Timers and Rotehceorrsding operations OPEN 24 RQT6885 B Insert inside the guides Side to be recorded facing up