Panasonic SC-PMX7 Owners Manual - Page 11

Memory reset (initialisation) Reset the memory when the following situations occur: • There is no response when buttons are pressed. • You want to clear and reset the memory contents. 1 Disconnect the AC power supply cord. Wait 3 minutes before you continue with step 2. 2 While you press and hold [Í/I] on the main unit, connect the AC power supply cord again is shown. 3 Release [Í/I]. All the settings are set back to the factory preset. It is necessary to set the memory items again. Remote control code When other Panasonic equipment responds to the remote control of this system, change the remote control code for this system. To set the code to "Remote 2" 1 Press and hold [CD] on the main unit and [2] on the remote control until "Remote 2" is shown. 2 Press and hold [OK] and [2] for a minimum of 4 seconds. To set the code to "Remote 1" 1 Press and hold [CD] on the main unit and [1] on the remote control until "Remote 1" is shown. 2 Press and hold [OK] and [1] for a minimum of 4 seconds. Specifications Amplifier section RMS output power Front Ch (both ch driven) 60 W per channel (3 ™), 1 kHz, 10% total harmonic distortion Total RMS power 120 W FTC output power Front Ch (both ch driven) 20 W per channel (3 ™), 50 Hz to 20 kHz, 1% total harmonic distortion Tuner section Frequency modulation (FM) Preset memory 30 stations Frequency range 87.90 MHz to 107.90 MHz (200 kHz step) 87.50 MHz to 108.00 MHz (100 kHz step) Antenna terminals 75 ™ (unbalanced) Terminals section "iPod_Port" connection DC OUT 5 V 2.1 A (max) USB standard USB 2.0 full speed Media file format support MP3 (*.mp3) USB device file system FAT12, FAT16, FAT32 ID3 Tag support v2.3 "iPod_Dock" connection DC OUT 5 V 1.0 A (max) Headphones jack Stereo, Ø 3.5 mm (1/8q) jack AUX input Pin jack Disc section Disc played [8 cm (3q) or 12 cm (5q)] CD, CD-R/RW (CD-DA, MP3) Pick up Wavelength 790 nm (CD) Laser power CLASS 1 Audio output (Disc) Number of channels 2 ch (FL, FR) Speaker section Speaker unit(s) Woofer 14 cm (5 1/2q) cone type x 1 Tweeter 1.9 cm (3/4q) dome type x 1 Super tweeter 1.5 cm(19/32q) piezo type x 1 Impedance 3™ Dimensions (W x H x D) 161 mm x 238 mm x 262 mm (6 11/32qk9 3/8qk10 5/16q) Mass (weight) Approx. 2.6 kg (5.7 lbs) Bluetooth® section Bluetooth® system specification V 3.0 Wireless equipment classification Class 2 Supported profiles A2DP, AVRCP Frequency band 2.4 GHz band FH-SS Driving distance 10 m (33 ft) Line of sight Prospective communication distance Measurement environment: Temperature 25 oC (77 oF) / Height 1 m (3.3 ft) Measure in "Mode 1" General Power supply AC 120 V, 60 Hz Power consumption 60 W Dimensions (main unit) (W x H x D) 210 mm x 120 mm x 266 mm Mass (weight) (main unit) (8 9/32qk4 3/4qk10 1/2q) Approx. 3 kg (6.6 lbs) Operating temperature range 0°C to +40°C (r32 oF to r104 oF) Operating humidity range 35% to 80% RH (no condensation) Power consumption in standby mode (When the iPod/iPhone/iPad is not charging) 0.2 W (approximate) Note: • Specifications are subject to change without notice. Mass and dimensions are approximate. • Total harmonic distortion is measured by the digital spectrum analyzer. VQT5J67 11