Panasonic SC-PMX7 Owners Manual - Page 9

Clock and timers Setting the clock This is a 12-hour clock. 1 Press [CLOCK/TIMER] to select "CLOCK". 2 Within 10 seconds, press [3, 4] to set the time. 3 Press [OK]. Press [CLOCK/TIMER] to show the clock for a few seconds. Note: • Reset the clock regularly to maintain accuracy. Sleep timer The sleep timer switches off the system after the set time. Press [SLEEP] repeatedly to select the setting (in minutes). To cancel, select "Off". 30min > 60min > 90min > 120min > Off b To show the remaining time Press [SLEEP]. Note: • The sleep timer can be used together with the play timer. • The sleep timer always comes first. Be sure not to set an overlap of timers. Play timer You can set the timer to come on at a certain time to wake you up. Preparation Set the clock. 1 Press [CLOCK/TIMER] repeatedly to select "TIMER Adjust". 2 Within 8 seconds, press [3, 4] to set the start time. 3 Press [OK]. 4 Do steps 2 and 3 again to set the end time. To start the timer 1 Prepare the audio source you want to listen to and set the volume. 2 Press [F, PLAY]. "F" is shown. To cancel, press [F, PLAY] again. The system must be switched off for the timer to operate. To check the settings Press [CLOCK/TIMER] repeatedly to select "TIMER Adjust". Note: • The timer starts at a low volume and increases gradually to the preset level. • The timer comes on at the set time every day if the timer is on. • If you switch off the system and switch on again while a timer is in operation, the timer will not stop at the end time. Sound effects Changing the sound quality 1 Press [SOUND] to select a sound effect. 2 Press [2, 1] to select the desired setting. BASS TREBLE Surround -4 to +4 "On Surround" or "Off Surround" By main unit only Turn [BASS] or [TREBLE] to adjust the level. Preset EQ Press [PRESET EQ] to select a setting. Heavy Soft Adds punch to rock For background music Clear Vocal Clarifies higher frequencies Adds gloss to vocal Flat Cancels the sound effect Using the auxiliary input You can connect a VCR, DVD player etc. and listen to the audio through this system. Preparation Connect the external equipment. 1 Press [SELECTOR] repeatedly to select "AUX". 2 Play the external equipment. Others Decrease the brightness of the display panel 1 Press [SETUP] to select "Dimmer". 2 Press [2, 1] to select "On" and then press [OK]. Note: • To cancel, select "Off" in step 2. Automatically switch off the system This function switches off the system (except in radio source) if you do not use the system for approximately 30 minutes. 1 Press [SETUP] repeatedly to select "Auto Off". 2 Press [2, 1] to select "On" and then press [OK]. Note: • To cancel, select "Off" in step 2. • When connected to a Bluetooth® device, this function does not work. D.BASS This function lets you enjoy a powerful bass effect. Press [D.BASS] to select "On D.BASS" or "Off D.BASS". 9 VQT5J67