Panasonic SC-PMX7 Owners Manual - Page 6

VQT5J67 "iPod_Dock" (Using Lightning connector): • Make sure that the iPod/iPhone is fully inserted and its back is resting against the cushion pad. • Make sure to remove the iPod/iPhone from its case. • Make sure to align your iPod/iPhone with the connector when inserting. "iPod_Port": • Use the dedicated USB cable (not supplied) for iPod/ iPhone/iPad. • Insert the USB device directly. Do not use any USB extension cable. • Before removing the USB device, select a source other than "USB". Disc tray: • Remove the CD only after it stops rotating. Charging an iPod/iPhone/iPad Charging starts when an iPod/iPhone/iPad is connected to this system. • During standby mode, charging will not start from the "iPod_Port" connection, however it will start as usual from the "iPod_Dock" connection. - To charge from the "iPod_Port" connection, start the charging before turning this unit to standby mode. • See the iPod/iPhone/iPad display for its battery charging status. • Disconnect the iPod/iPhone/iPad if it is not used for an extended period of time after charging is complete. • Charging stops when the battery is fully charged. The battery will deplete naturally. Media information • Please be aware that Panasonic accepts no responsibility for the loss of data and/or information. Compatible iPod/iPhone/iPad Compatible with "iPod_Dock" connection (Using Lightning connector) iPhone 5 iPod touch (5th generation) iPod nano (7th generation) 6 Compatible with "iPod_Port" connection [Using dedicated USB cable (not supplied)] iPhone 5 / iPhone 4S / iPhone 4 / iPhone 3GS / iPhone 3G / iPhone iPad (3rd, and 4th generation) / iPad 2 / iPad / iPad mini iPod touch 1st, 2nd, 3rd, 4th, and 5th generation iPod nano 2nd, 3rd, 4th, 5th, 6th, and 7th generation (as of January 2013) Note: • Compatibility depends on the software version. Update your iPod/iPhone/iPad to the latest software before using it with this unit. • Read the User Guide of the iPod/iPhone/iPad for the operating instructions. Compatible USB devices • USB devices that support bulk-only transfer. • USB devices that support USB 2.0 full speed. Note: • Files are defined as tracks and folders are defined as albums. • Track must have the extension ".mp3" or ".MP3". • This system can access up to: - 255 albums (including root folder) - 2500 tracks - 999 tracks in one album • CBI (Control/Bulk/Interrupt) is not supported. • Some files can fail to work because of the sector size. • NTFS file system is not supported (only FAT12/FAT16/ FAT32 file system is supported). Compatible CD • This system can play CD-R/RW with CD-DA or MP3 format content. • Disc must conform to ISO9660 level 1 or 2 (except for extended formats). Note: • Some CD-R/RW cannot be played because of the condition of the recording. • MP3 files are defined as tracks and folders are defined as albums. • This system can access up to: - CD-DA: 99 tracks - MP3: 999 tracks, 255 albums (including root folder) and 20 sessions • Recordings will not necessarily be played in the order you recorded them. Bluetooth® operations By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this system wirelessly. Refer to the operating instructions of the Bluetooth® device for details. Pairing Bluetooth® devices Preparation • Turn on the Bluetooth® feature of the device and place the device near this system. • If this system is already connected to a Bluetooth® device, disconnect it. 1 Press [SELECTOR] repeatedly to select "BLUETOOTH". If "Pairing" is indicated on the display, go to step 3. 2 Press [PLAY MENU] to select "New Device" and then press [OK]. "Pairing" is indicated on the display. 3 Select "SC-PMX7" from the Bluetooth® device's Bluetooth® menu. 4 Start play on the Bluetooth® device. Note: • If prompted for the passkey, input "0000". • You can register up to 8 devices with this system. If a 9th device is paired, the device that has not been used for the longest time will be replaced. Connecting a paired Bluetooth® device Preparation • Turn on the Bluetooth® feature of the device and place the device near the speaker unit. • If this system is already connected to a Bluetooth® device, disconnect it. 1 Press [SELECTOR] repeatedly to select "BLUETOOTH". "Ready" is indicated on the display. 2 Select "SC-PMX7" from the Bluetooth® device's Bluetooth® menu. The name of the connected device is indicated on the display for 2 seconds. 3 Start play on the Bluetooth® device. Note: • This system can only be connected to one device at a time. • When "BLUETOOTH" is selected as the source, this system will automatically try and connect to the last connected Bluetooth® device. • The Bluetooth® device will be disconnected if a different audio source (e.g., "CD") is selected.