Panasonic SC-PMX90 Owners Manual - Page 13

Using the AUX IN input You can change the input level etc. when you listen to the audio from a portable audio player etc. connected to AUX IN terminal. Preparation Connect the external equipment to AUX IN terminal. To adjust the input level You can adjust the input level. 1 Press [SOUND] repeatedly to select "INPUT LEVEL". 2 Press [2, 1] to select "LOW" or "HIGH" and then press [OK]. Note: • The factory default is "HIGH". • Select "LOW" if the sound is distorted during "HIGH" input level. • Read the operating instructions of the external music device for details. • Components and cables are sold separately. AUX-IN auto play The system will automatically switch to AUX source when it detects the signal from an external music device. This function also works in standby mode. 1 Press [SETUP] repeatedly to select "AUX-IN AUTO PLAY". 2 Press [2, 1] to select "ON" and then press [OK]. Note: • The factory default is "OFF". • This function does not work when the volume of the external music device is low, increase its volume. • When the function is switched off and every time you switch to AUX source, "AUX-IN AUTO PLAY IS OFF" will be shown once. • Stop or pause the external music device before you change to other music source or to standby mode so as to prevent the automatic switch to AUX source. • When you use this function in standby mode, it may require some seconds to be output the sound. • If this function is set to "ON", the standby power consumption will increase. (Approx. 1.9 W) Using the PC input You can play back music on the PC with this system's speakers by connecting a PC to the PC IN terminal on the main unit. About supported format, refer to "Specifications" (> 17). Before connecting to a PC Follow the steps below. • Refer to the following for the recommended OS versions for your PC: - Windows 7, Windows 8, Windows 8.1, Windows 10 - OS X 10.7, 10.8, 10.9, 10.10, 10.11 - macOS 10.12, 10.13 1 Download and install the dedicated driver to the PC. (Only for Windows OS) Download and install the driver from the website below. http://panasonic.jp/support/global/cs/audio/ (This site is in English only.) 2 Download and install the dedicated app "Panasonic Audio Player 2" (free of charge) on your PC. (For Windows OS and OS X) Download and install the app from the website below. http://panasonic.jp/support/global/cs/audio/ (This site is in English only.) (as of August 2018) Listening to audio from a PC 1 Disconnect the AC power supply cord. 2 Connect the main unit and a PC. Main unit (rear) PC USB-DAC port USB Type B USB 2.0 cable (not supplied) Type A 3 Connect the AC power supply cord to the main unit and turn this system on. 4 Press [RADIO, EXT-IN] repeatedly to select "PC". 5 Operate the PC for playback. Note: • When you play back high-resolution audio, it is recommended that you use a compatible USB 2.0 High Speed Cable. Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries. macOS is a trademark of Apple Inc. Windows is a trademark or a registered trademark of Microsoft Corporation in the United States and other countries. TQBM0360 13