Panasonic SC-PMX90 Owners Manual - Page 8

Connecting a paired Bluetooth® device 1 Press [ ] to select "BLUETOOTH". "READY" is indicated on the display. 2 Select "SC-PMX90" from the Bluetooth® device's Bluetooth® menu. The name of the connected device is indicated on the display for a few seconds. 3 Start playback on the Bluetooth® device. Note: • If prompted for the passkey, input "0000". • You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used for the longest will be replaced. • This unit can only be connected to one device at a time. • When "BLUETOOTH" is selected as the source, this unit will automatically try and connect to the last connected Bluetooth® device. ("LINKING" is indicated on the display during this process.) If the connection attempt fails, try to establish a connection again. Bluetooth® transmission mode You can change the transmission mode to prioritize transmission quality or sound quality. Preparation • Press [ ] to select "BLUETOOTH". • If a Bluetooth® device is already connected, disconnect it. 1 Press [PLAY MENU] repeatedly to select "LINK MODE". 2 Press [2, 1] to select the mode and then press [OK]. MODE 1: Emphasis on connectivity MODE 2: Emphasis on sound quality Note: • Select "MODE 1" if the sound is interrupted. • When enjoying video contents with this function, the video and audio output may not be synchronised. In this case, select "MODE 1". • The factory default is "MODE 2". Bluetooth® input level If the sound input level from the Bluetooth® device is too low, change the input level setting. Preparation • Connect a Bluetooth® device. 1 Press [PLAY MENU] repeatedly to select "INPUT LEVEL". 2 Press [2, 1] to select the level and then press [OK]. "LEVEL 0" ,. "LEVEL i1" ,. "LEVEL i2 J Note: • Select "LEVEL 0" if the sound is distorted. • The factory default is "LEVEL 0". Disconnecting a Bluetooth® device 1 While a Bluetooth® device is connected: Press [PLAY MENU] repeatedly to select "DISCONNECT?". 2 Press [2, 1] to select "OK? YES" and then press [OK]. Note: • You can also disconnect the Bluetooth® device by pressing and holding [ -PAIRING] on the unit. • The Bluetooth® device will be disconnected if a different audio source (e.g., "CD") is selected. Bluetooth® standby When "SC-PMX90" is selected from a paired Bluetooth® device's Bluetooth® menu, this unit will turn on automatically from standby mode and establish a Bluetooth® connection. 1 Press [SETUP] repeatedly to select "BLUETOOTH STANDBY". 2 Press [2, 1] to select "ON" and then press [OK]. Note: • To turn the function off, select "OFF" in step 2. • The factory default is "OFF". If this function is set to "ON", the standby power consumption will increase. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. TQBM0360 8