Panasonic SC-PMX90 Owners Manual - Page 15
Bluetooth, Main unit displays
![]() |
View all Panasonic SC-PMX90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
USB The USB device or the contents in it cannot be read. • The format of the USB device or the contents in it is/ are not compatible with the system. Slow operation of the USB device. • Large content size or large memory USB device takes longer time to read. The elapsed time shown is different from the actual play time. • Transfer the data to another USB device or backup the data and reformat the USB device. Bluetooth® Pairing cannot be done. • Check the Bluetooth® device condition. The device cannot be connected. • The pairing of the device was unsuccessful or the registration has been replaced. Try pairing the device again. • This system might be connected to a different device. Disconnect the other device and try pairing the device again. • If "MODE 2" is selected in "LINK MODE", select "MODE 1". (> 8) • If the problem persists, turn the unit off and on, then try again. The device is connected but audio cannot be heard through this system. • For some built-in Bluetooth® devices, you have to set the audio output to "SC-PMX90" manually. Read the operating instructions for the device for details. The sound is interrupted. • The device is out of the 10 m (33 ft) communication range. Bring the Bluetooth® device closer to this system. • Remove any obstacle between this system and the device. • Other devices that use the 2.4 GHz frequency band (wireless router, microwaves, cordless phones, etc.) are interfering. Bring the Bluetooth® device closer to this system and distance it from the other devices. • Select "MODE 1" for stable communication. (> 8) AUX "AUX-IN auto play" does not work. • You have not connected the external music device correctly. • Increase the volume of the external music device. • If "OFF" was selected during "AUX-IN AUTO PLAY", select "ON". Unintentional automatic switch to AUX source. • Connect the audio cable to the system only after all the other connections have been made. Noise may be detected when connecting the external music device and it will cause the set to automatically switch to AUX source. PC The PC does not recognize this system. • Check your operating environment. (> 13) • Restart the PC, turn off and on this system, and then reconnect the USB cable. • Use another USB port of the connected PC. • Install the dedicated driver if using a PC with Windows. Main unit displays "--:--" • You connected the AC power supply cord for the first time or there was a power failure recently. Set the clock. "ADJUST CLOCK" • Clock is not set. Adjust the clock accordingly. "ADJUST TIMER" • Play timer is not set. Adjust the play timer accordingly. "AUTO OFF" • The unit has been left unused for about 20 minutes and will shut down in a minute. Press any button to cancel it. "CHECKING CONNECTION" • The unit is checking the connected USB device. "DIMMER" • Appears 10 seconds after the volume is turned to "0". "ERROR" • An incorrect operation was done. Read the instructions and try again. "F" / "F stands for a number.) • There is a problem with this unit. Disconnect the AC power supply cord from the AC outlet, reconnect it to the outlet after about 30 seconds. Wait for about 10 seconds, then turn on the unit. If the problem still persists, disconnect the AC power supply cord and consult your dealer. "NO DEVICE" • The USB device is not connected. Examine the connection. "NO DISC" • You have not put in a disc or put in a disc that the system cannot play. "NO PLAY" • Examine the content. You can only play supported format. (> 16) • The files in the USB device can be corrupted. Format the USB device and try again. • The unit may have a problem. Turn the unit off and then on again. TQBM0360 15
![](/manual_guide/products/panasonic-scpmx90-owners-manual-c1c44c7/15.png)