Panasonic SCHC25 SCHC25 User Guide - Page 4

ENGLISH Table of contents IMPORTANT SAFETY INSTRUCTIONS 3 Listening caution 3 Product service 3 Preparing the remote control 4 Making the connections 4 Overview of controls 5 Discs 6 Using an iPod or iPhone 7 Radio 8 Clock and timers 8 Sound effects 9 External equipment 9 Remote control code 9 Troubleshooting guide 9 Maintenance 10 Specifications 10 Limited Warranty 11 Español Cómo preparar el control remoto 12 Cómo realizar las conexiones 12 Visión de los controles 13 Discos 14 Cómo usar un iPod o iPhone 14 Radio 15 Reloj y temporizador 15 "Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, or iPhone may affect wireless performance. iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. Making the connections Conserving power The system consumes approximately 0.1 W when it is in standby mode. Disconnect the power supply if you do not use the system. Some settings will be lost after you disconnect the system. You have to set them again. Preparing the remote control 1 Connect the FM indoor antenna. Place the antenna where reception is best. Adhesive tape RQTX1249 (not included) Use alkaline or manganese battery. Install the battery so that the poles (+ and -) align with those in the remote control. Point the remote control at the remote control sensor (Z 5), away from obstacles, at a maximum range of 7 m (23 feet) directly in front of the main unit. CAUTION! • Do not break open or short-circuit the battery. • Do not charge the alkaline or manganese battery. • Do not use the battery if the cover has peeled off. • Do not heat or expose to flame. • Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. • Mishandling of battery can cause electrolyte leakage, which can cause a fire. • Remove the battery if you do not use the remote control for a long period of time. Keep in a cool, dark area. CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. 4 Dispose of used batteries according to the manufacturer's instructions. 2 Connect the AM loop antenna. Click! 3 Connect the AC power supply cord. Use the included AC power supply cord with this system only. Do not use an AC power supply cord from other equipment. Note: • These speakers do not have magnetic shielding. Do not put them near TVs, PCs or other equipment easily influenced by magnetism. • You cannot remove the net of the speakers.